I'm thinking that driving the PR5 is screwing with me...
Driving both to and from the track it seems like there is a helluva lot of play in the steering wheel of my Cobra.. I'm not sure if it is driving the PR5 that is causing me to think this way or there is something wrong with the front end.
I just had the alignment done a few months back and it really hasn't seen much driving in the past month or so...
Anyone want to give me a 2nd opinion?
I just had the alignment done a few months back and it really hasn't seen much driving in the past month or so...
Anyone want to give me a 2nd opinion?
__________________
The Iron(FE)-Works
My daddy always said, "When you want to hammer a nail, don't do anything fancy. Just get a hammer and pound the son of a bitch."
The Iron(FE)-Works
My daddy always said, "When you want to hammer a nail, don't do anything fancy. Just get a hammer and pound the son of a bitch."
I think you are just use to the tighter, more responsive steering feel of the PR5. I have the same problem going from the Focus to any Mustang. The steering just feels so vague and loose in comparison.
__________________
Guest
Posts: n/a
I just test drove one of those (PR5) last week and really liked the handling. You are just use to the tightness of the PR5 like Alan said.
By the way how are you liking the PR5 ? I am thinking about getting either that or the 5 door SVT Focus for my wife.
By the way how are you liking the PR5 ? I am thinking about getting either that or the 5 door SVT Focus for my wife.
Originally posted by "FordMan"
I just test drove one of those (PR5) last week and really liked the handling. You are just use to the tightness of the PR5 like Alan said.
By the way how are you liking the PR5 ? I am thinking about getting either that or the 5 door SVT Focus for my wife.
I just test drove one of those (PR5) last week and really liked the handling. You are just use to the tightness of the PR5 like Alan said.
By the way how are you liking the PR5 ? I am thinking about getting either that or the 5 door SVT Focus for my wife.
Actually it really is a nice little car.. it's comfortable (much more so than the ZX3 I test drove.. don't know about the ZX5 tho) and it's pretty responsive. My only two complaints so far is that the Sport Trannsmission really isn't all that economical since there isn't an overdrive (still getting 27MPG tho) and that I still haven't figured out a "windows/moonroof open" combination that doesn't tie my hair in knots (hairbag that I am).
__________________
The Iron(FE)-Works
My daddy always said, "When you want to hammer a nail, don't do anything fancy. Just get a hammer and pound the son of a bitch."
The Iron(FE)-Works
My daddy always said, "When you want to hammer a nail, don't do anything fancy. Just get a hammer and pound the son of a bitch."
Originally posted by "phatstang1"
I think you are just use to the tighter, more responsive steering feel of the PR5. I have the same problem going from the Focus to any Mustang. The steering just feels so vague and loose in comparison.
I think you are just use to the tighter, more responsive steering feel of the PR5. I have the same problem going from the Focus to any Mustang. The steering just feels so vague and loose in comparison.
__________________
The Iron(FE)-Works
My daddy always said, "When you want to hammer a nail, don't do anything fancy. Just get a hammer and pound the son of a bitch."
The Iron(FE)-Works
My daddy always said, "When you want to hammer a nail, don't do anything fancy. Just get a hammer and pound the son of a bitch."
Originally posted by "MinGreyCobra"
Part of it is the rubber rag joint in the steering shaft. You could replace it with a nice one from flaming river that has needle bearings... That will definitely remove some of the play.
Part of it is the rubber rag joint in the steering shaft. You could replace it with a nice one from flaming river that has needle bearings... That will definitely remove some of the play.
__________________
The Iron(FE)-Works
My daddy always said, "When you want to hammer a nail, don't do anything fancy. Just get a hammer and pound the son of a bitch."
The Iron(FE)-Works
My daddy always said, "When you want to hammer a nail, don't do anything fancy. Just get a hammer and pound the son of a bitch."


