Ford, Lincoln, Mercury Tech Automotive Related Topics Only !

Good alignment shop?

Thread Tools
 
Old Jan 15, 2010 | 07:17 AM
  #1 (permalink)  
Jaden's Avatar
Thread Starter
Registered User
 
Joined: Jan 2010
Posts: 7
Likes: 0
Default Good alignment shop?

Hey guys,

I'm new to the area and I'm looking for a good alignment shop in South Tampa. I'm upgrading to Koni shocks and struts and Steeda sport springs this weekend. Thanks.
__________________
2007 Mustang GT - mostly stock
Reply
Old Jan 15, 2010 | 10:40 AM
  #2 (permalink)  
harold harper's Avatar
h9
 
Joined: Jul 2006
Posts: 1,888
Likes: 0
Default

shauns shop. his name here is na306stang i believe.he has a shop close by to you with good labor rate.he is doing my car next weekend.shop all american street cars.
Reply
Old Jan 15, 2010 | 08:54 PM
  #3 (permalink)  
BigDawg's Avatar
has his prioritys ef'd up
 
Joined: Mar 2004
Posts: 2,450
Likes: 0
Default

If your in South Tampa, then look no further than Southern Tire on MacDill Avenue. Talk to a guy named Dwayne. He will take care of you.
__________________
Ryan
1990 Mustang GT (In Process)
1993 LX Coupe (Daily Driver, but just choose not to)
2005 Excursion (Big Pig)
Reply
Old Jan 15, 2010 | 10:13 PM
  #4 (permalink)  
EFI-Unlimited's Avatar
Registered User
 
Joined: Jan 2008
Posts: 221
Likes: 0
Default

S&R Performance in Tampa has a John Bean alignment rack that gets calibrated every 6 months. They are familer with performance alignments and corner balancing. If you are just looking for a run of the mill alignment, you can go anywhere, but if you are looking for a specialist that takes your alignment seriously, these are your guys.

S&R Performance
9509 N. Trask St.
813-961-0609

Brian
EFI-Unlimited
Reply
Old Jan 16, 2010 | 09:34 PM
  #5 (permalink)  
Stealth Mode's Avatar
Still CREEPIN
 
Joined: May 2008
Posts: 4,867
Likes: 0
Default

+1 For All American Street Car Performance.
__________________

TurboRAM Member #5
24psi & Stable
GET SOME

Reply
Old Jan 17, 2010 | 02:03 PM
  #6 (permalink)  
Jaden's Avatar
Thread Starter
Registered User
 
Joined: Jan 2010
Posts: 7
Likes: 0
Default

Thanks for the info guys. I ended up getting it done at Tire Kingdom on South Dale Mabry. It was a pretty easy job. The camber and toe were slightly off. Thanks again.
__________________
2007 Mustang GT - mostly stock
Reply
Old Jan 18, 2010 | 07:33 AM
  #7 (permalink)  
Na306StAnG's Avatar
Flowmaster nut swinger
 
Joined: Jan 2005
Posts: 7,535
Likes: 0
Default

Thanks guys


https://www.tamparacing.com/forums/a...an-do-all.html
__________________
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun

Reply
Old Jan 18, 2010 | 03:41 PM
  #8 (permalink)  
Jaden's Avatar
Thread Starter
Registered User
 
Joined: Jan 2010
Posts: 7
Likes: 0
Default

Wish I had gone to All-American. The guy never really got the camber to where I wanted it. I wanted -1.2 on both sides, but ended up with -1.4. He kept trying to align it in the air and of course when he let it down the camber was off. Did this several times and then I just finally said leave where it is, which ironically is where the camber was when I first brought it.
__________________
2007 Mustang GT - mostly stock
Reply
Old Jan 18, 2010 | 04:11 PM
  #9 (permalink)  
MiDiablo's Avatar
Registered User
 
Joined: Feb 2005
Posts: 6,099
Likes: 0
Default

Definitely take it to All American. Shaun and his crew aligned my car, readjusted the suspension to get it to align correctly, and also installed my caster/camber plates and the car is dead on.
Reply




All times are GMT -8. The time now is 02:12 PM.