ruler

I just traded my wheels for some bigs and littles off of a fox (i have the sn95 in my sig). The fronts are 3/12 and the backs are almost 12 inches wide. I know I need some kind of spacers on the front to clear the brakes and a little bit of room (im guessing 1/4 inch to clear the ebrake and brake lines in the back. Where can I get the hubcentric or whatever its called spacers and what sizes would you recommend.

I dont know the back spacing on these wheels but they fit fine on a stock axeled foxbody that had a 351 kmember and coilovers on the front.

GNs-r-slow

Whats the backspace on the rears? Fronts just grind of the bracket on the caliper that sticks out past the hub face

ruler

I dont know the back spacing. The middle of the rear rims is six inches in from the outside lip if that is how you find it.

Tiffiny

no lol

ruler

i had it backwards be right back with the numbers

GNs-r-slow

Mounting face (inside) to bead. 6-1/2" backspace should clear no problems.

ruler

i believe it is 8.5 inches backspacing thet was from the inside part of the wheel to where it meets the hub

ruler

rim is 12 wide

GNs-r-slow

You can run spacers. I'd only recommend it if you run long studs... you seem to have a pretty healthy set up, but thats just me.
Btw..the fox those come off of mini-tubbed?

ruler

the fox had a standard rear axle.