Looking for a shop to install a couple parts...
Thread Starter
I give out Dutch Ovens!!!
Joined: Aug 2005
Posts: 912
Likes: 0
Looking for a shop to install a couple parts...
I was just wondering anyone in the Clearwater/PH/Pasco area that is willing to install Steeda x2's, Bumpsteer, LCA's and an MM STB in my '99 GT.
Also, what would the turnaround time be in the labor as well as a estimate, if possible!
Car will not need an alignment at the time, as I know someone with a alignment machine he will do for a couple Beers!
Also, what would the turnaround time be in the labor as well as a estimate, if possible!
Car will not need an alignment at the time, as I know someone with a alignment machine he will do for a couple Beers!
Bondsman
Joined: Oct 2005
Posts: 8,023
Likes: 0
Rep for honesty!
Registered User
Joined: Mar 2008
Posts: 3,486
Likes: 0
Not trying to step on any toes here. $hawn is 100% more qualified then I am. I am in no way even considered a qualified mechanic. But I am one hell of a wrench and I am confident I can complete what you want done in less then a day. My father inlaw has a full shop with lift and over $20k in tools that I have access to.
I've done all of this already to both my old 96 GT and our 96 Cobra,. so I am very familiar with what needs to be done.
Reason I ask is that I've been out of work and could use some side work to help tide over unemployment. I can not do the alignment portion of the work,.. but there is a shop 4 miles from my inlaws place that will do one for $59.00 and I have a 20' car trailer to get it there,.. though the alignment other then the camber should be the same once I am done.
Once again I am not a qualified mechanic, $hawn has much more experience then I do in this field. But I'm 40 years old and I am one hell of a wrench and have enough personal experience that I am very confident I can complete what you need finished to your satisfaction for a very reasonable price. I will stand behind my work and not leave you hanging. I normally do not like to work on cars not in my family. But being broke with 2 teenage kids makes you swallow your pride sometimes. Others here that know me can attest to my integrity and honor to follow through with my word. I'd come pick your car up with my truck and car trailer. My father inlaw's shop is located in New Port Richey. I would have it delivered to you the same evening. Or the following morning at the latest. You can with hold payment until you are 100% satisfied with the work completed.
Below are images of some projects that I've done that pertain to what you need done.
Hurst
I've done all of this already to both my old 96 GT and our 96 Cobra,. so I am very familiar with what needs to be done.
Reason I ask is that I've been out of work and could use some side work to help tide over unemployment. I can not do the alignment portion of the work,.. but there is a shop 4 miles from my inlaws place that will do one for $59.00 and I have a 20' car trailer to get it there,.. though the alignment other then the camber should be the same once I am done.
Once again I am not a qualified mechanic, $hawn has much more experience then I do in this field. But I'm 40 years old and I am one hell of a wrench and have enough personal experience that I am very confident I can complete what you need finished to your satisfaction for a very reasonable price. I will stand behind my work and not leave you hanging. I normally do not like to work on cars not in my family. But being broke with 2 teenage kids makes you swallow your pride sometimes. Others here that know me can attest to my integrity and honor to follow through with my word. I'd come pick your car up with my truck and car trailer. My father inlaw's shop is located in New Port Richey. I would have it delivered to you the same evening. Or the following morning at the latest. You can with hold payment until you are 100% satisfied with the work completed.
Below are images of some projects that I've done that pertain to what you need done.
Hurst
__________________
Originally Posted by Tiffiny
"We all heart the Hurst"
Last edited by Hurstmeister; Apr 21, 2009 at 07:27 PM.
Registered User
Joined: Mar 2008
Posts: 3,486
Likes: 0
4.6 is ok. They have their place.
Personally I'd much rather be working on these,..
... much much more room to work on these in the engine bay and no need to drop the k-member with long tubes anytime you need to pull the heads. I find it much more relaxing working on a SBF then a Mod motor.
Funny thing is I burnt my finger after touching the tube I was grinding off. LoL
Hurst
Personally I'd much rather be working on these,..
... much much more room to work on these in the engine bay and no need to drop the k-member with long tubes anytime you need to pull the heads. I find it much more relaxing working on a SBF then a Mod motor.
Funny thing is I burnt my finger after touching the tube I was grinding off. LoL
Hurst
__________________
Originally Posted by Tiffiny
"We all heart the Hurst"
Last edited by Hurstmeister; Apr 21, 2009 at 07:54 PM.
banana republic
Joined: Jan 2008
Posts: 8,819
Likes: 0
Nothing against $hawn...I just haven't dealt with him before in a business sense. And I have with Dave. He treated me right and helped me out.
