This is my first time installing this intake into my sn95. I gues my only real problem that i'm tryin to figure out is where to mount the sensors that are on the elbow of the stock itake onto the gt40 intake?

 

You might have an explorer lower. There is no provision for the IAT sensor which is on the number 5 intake tract of the stock intake. You probably will want to drill it and tap it for the sensor.

 

the IAT on the sn cars is in the plastic intake tube...the only thing on the transition (elbow area) is the egr valve. Are you using an adapter elbow for a 94-95 car with your older gt40?

 

WOW brain fart, ok on the elbow do i need a adapter for the egr? I called a few places they said i need the adapter for the egr is this true or can i by pass that and hook it up another way?

 

without the adaptor elbow you can't install the egr and you run in to all sorts of problems....it can be done, it's just a much easier with it. <everything goes back where it came from

edit. your egr will bolt directly to the adaptoe elbow.

 

heres a link to show you guys what im talkin about
1994-1995 Mustang GT/5.0L intake Elbow adapter - Satin [ PRP54151 ] from Brothers Performance Warehouse

 

Having trouble Jerel? You should up grade to 24's while your there.