Problem with my 95 Mustang.
Ok. Heres the problem. My Mustang is acting up. It will go into drive and move, but when i get about 100 feet or so. It will stop moving. and it will hardly go. And same with Reverse. What do you think the problem could be?
kind avague statement..what do u mean by it wont go? engine revs fine but car doesnt move or engine wouldnt rev up? more details please
chad
chad
__________________

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
sounds like hes describing a slipping transmission.... out of fluid, burnt clutches something like that.
__________________

Sn95' Tripple Black Cobra
Mods:Heads/Cam/Intake/Exhaust...just your typical stock mustang...

Sn95' Tripple Black Cobra
Mods:Heads/Cam/Intake/Exhaust...just your typical stock mustang...
Ok. When I have it in drive right now. It wont go. But when I have it in Reverse it will go back. But at times it wont do anything when I have it in Reverse or drive. and it wont go faster than 2mph. If someone lives near Brandon and they can come over and check it out you'll see what im talking about.
i would tend to agree but its still a vague statement...does the motor rev up when u try to move?, or does it not rev up at all?
__________________

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
Last edited by n8secstangg; Jul 23, 2008 at 04:55 PM.
Ok. When I have it in drive right now. It wont go. But when I have it in Reverse it will go back. But at times it wont do anything when I have it in Reverse or drive. and it wont go faster than 2mph. If someone lives near Brandon and they can come over and check it out you'll see what im talking about.
you happen the check the tranny fluid ?
that would be the dipstick on the left side of the motor



