I need a GM 3-bar MAP sensor - buy at dealer??
Registered User
Thread Starter
Join Date: Jun 2004
Posts: 2,983
Likes: 0
Received 0 Likes
on
0 Posts
I need a GM 3-bar MAP sensor - buy at dealer??
I bought one of these before through NAPA but they had to order it...and it wasn't cheap. Anyone know where I can get one?
__________________
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
Did you try speed shops? The dealer is the only other place I can think of locally.
Theres a place in Brandon that Cheverolet gets thier non-stocking parts from I believe its called AC delco Parts House. I picked up several things there when I had my GN. I would call there when I needed something before dealer because they would send me there to pick it up anyways
Its on HWY 60
Its on HWY 60
Theres an AC Delco parts house on Linebaugh and Dale Mabry in Tampa as well. Its where my buddy bought his MAP sensor for his GN.
__________________
Ryan
1990 Mustang GT (In Process)
1993 LX Coupe (Daily Driver, but just choose not to)
2005 Excursion (Big Pig)
Ryan
1990 Mustang GT (In Process)
1993 LX Coupe (Daily Driver, but just choose not to)
2005 Excursion (Big Pig)
AutoZone.com | Shopping | Accessories | Product Detail - MSD 3-Bar MAP Sensor for blown/turbo applications up to 30 lbs of boost (Stock Style)
Registered User
Thread Starter
Join Date: Jun 2004
Posts: 2,983
Likes: 0
Received 0 Likes
on
0 Posts
I picked one up - thats about that I paid. Believe it or not, finding a pig tail connector is about impossible. GM said that they had them but wanted either $46 or $85 depending on which one I picked. Plus they were total assholes.
Maher Chevrolet on 19 in St. Pete. Screw those guys. I told them to their face that the price was rediculous and that my friends always told me that Chevy was inexpensive compared to Fords...then mentioned that I was glad I owned a Ford so that I didn't have to get ripped off by GM all the time
Maher Chevrolet on 19 in St. Pete. Screw those guys. I told them to their face that the price was rediculous and that my friends always told me that Chevy was inexpensive compared to Fords...then mentioned that I was glad I owned a Ford so that I didn't have to get ripped off by GM all the time
__________________
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
You can modify a 1 or 2 bar map pigtail to work with the 3 bar. Basically they have a notch on the MAP plug that is in different places so it will only plug into the correct harness. All you have to do is trim the notch or trim the pigtail to get it to work.
Registered User
Thread Starter
Join Date: Jun 2004
Posts: 2,983
Likes: 0
Received 0 Likes
on
0 Posts
I bought one from MSD, then had to modify it
Looks like about 15lbs. I was shooting for 17-18 - looks like I'll have to make a pulley change
Looks like about 15lbs. I was shooting for 17-18 - looks like I'll have to make a pulley change
__________________
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!
Jeff
93 Coupe - check out my blog - http://www.93coupe.com
01 Cobra - Stockified - Wife Owned and operated
68 Coupe PROJECT <- Been in the family for 25 years!