Question Need Help
Thread Starter
I can fix your bullshit
Joined: Oct 2005
Posts: 2,998
Likes: 0
Question Need Help
I Have An 86 Gt With 87 Gt Spindles Lsc Rotors No Prob There
My Problem Is With My Wheels The Dust Cover On The Rotor Knocks The Center Cap Out Of My 98 Svt Rims And The Rim Doesnt Sit Flush Fully My Question Is Does Any Body No Of A Wheel Adapter That Could Correct This Problem
Thank John
My Problem Is With My Wheels The Dust Cover On The Rotor Knocks The Center Cap Out Of My 98 Svt Rims And The Rim Doesnt Sit Flush Fully My Question Is Does Any Body No Of A Wheel Adapter That Could Correct This Problem
Thank John
__________________
Race Photographer
Joined: Nov 2000
Posts: 42,904
Likes: 0
different rims or upgrade to sn95 spindles
read up on the lincoln boards, some ppl have done things with certain rims to get them to fit
read up on the lincoln boards, some ppl have done things with certain rims to get them to fit
__________________
Floridaracing.org Tenative Schedulealso check out the Auto-x Event Schedule
"I am and what I do are not a taxable commodity for you to use and abuse" - Me
This is my fuck the government movement
Floridaracing.org Tenative Schedulealso check out the Auto-x Event Schedule
"I am and what I do are not a taxable commodity for you to use and abuse" - Me
This is my fuck the government movement
Registered User
Joined: Aug 2003
Posts: 1,399
Likes: 0
the rotors wheel bearing section is too large for the center of the cobra wheels...and too deep as well...like mars said...different brakes or different wheels...a reg spacer may work but they will stick out real far
__________________
www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
