Our WFC trip
well we have been here since thursday and have been fighting some issues but seem to have figured out some stuff we broke a ring/pinion set on the 2nd qualifying pass about 400 ft out, sheered them clean off, 3rd round we went 7.76@192 with a soft tune and are #1 qualifiers going into eliminations...our CRt tranny is working killer, the turbos are making good power, if we get a bye first round we are going to try to let it hang out since we only went 1.38 60 ft and 5.20@151 on that 7.76 pass...there is way more in it
chad
chad
__________________

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
nice........good luck
__________________
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
corey berry is driving
__________________

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
aahhh i see now. This is the sheet I saw. it must have been a very early pass and not qualifying!

Because now I found this one and it much much much much much much BETTER!!!!! KICK ASS GUYS!

Because now I found this one and it much much much much much much BETTER!!!!! KICK ASS GUYS!
__________________
where di u find the pics at?
__________________

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
nevermind....lol...yonsonracing
__________________

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials

www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials


