Opinion for a cam on a BBF blow through setup.
Thread Starter
Scissor me timbers!
Joined: Nov 2003
Posts: 1,051
Likes: 0
Opinion for a cam on a BBF blow through setup.
I got a fresh 466 that im planning on stroking to a 545 and am doing a blow through turbo setup
.On ford460.com I was suggested a lun-64030 or 031 for mechanical roller,or for hydraulic-CCA-34-330-4 or LUN-06166. The heads are big chamber D3VE and am also stumped on which carb to start out with.Most guys do 850 cfm on n/a for that cid,and suggestions?I'd like to keep it pump gas and just do a meth injection setup as well.Im done messing around with modular,I got it and im going to use it.If it ever hooks
.On ford460.com I was suggested a lun-64030 or 031 for mechanical roller,or for hydraulic-CCA-34-330-4 or LUN-06166. The heads are big chamber D3VE and am also stumped on which carb to start out with.Most guys do 850 cfm on n/a for that cid,and suggestions?I'd like to keep it pump gas and just do a meth injection setup as well.Im done messing around with modular,I got it and im going to use it.If it ever hooks
Thread Starter
Scissor me timbers!
Joined: Nov 2003
Posts: 1,051
Likes: 0
Insert fancy title here.
Joined: Dec 2005
Posts: 332
Likes: 0
i'd say get a custom grind
__________________
'87 GT T-Top(RIP) T-boned by a soccer mom...
'99 Trans Am... 346ci 434whp 452ft/lbs All motor.. Nice weather driver
'07 ZX6R... Track bike
'99 Trans Am... 346ci 434whp 452ft/lbs All motor.. Nice weather driver
'07 ZX6R... Track bike
Insert fancy title here.
Joined: Dec 2005
Posts: 332
Likes: 0
+1 on Jay, he's always had great customer service and will pull as many extra ponies out of the motor as he can. here's a link to his build sheets and site Camshaft Innovations - CI Build Sheets
__________________
'87 GT T-Top(RIP) T-boned by a soccer mom...
'99 Trans Am... 346ci 434whp 452ft/lbs All motor.. Nice weather driver
'07 ZX6R... Track bike
'99 Trans Am... 346ci 434whp 452ft/lbs All motor.. Nice weather driver
'07 ZX6R... Track bike
Thread Starter
Scissor me timbers!
Joined: Nov 2003
Posts: 1,051
Likes: 0
+1 on Jay, he's always had great customer service and will pull as many extra ponies out of the motor as he can. here's a link to his build sheets and site Camshaft Innovations - CI Build Sheets
Thanks for the link.
Insert fancy title here.
Joined: Dec 2005
Posts: 332
Likes: 0
np
__________________
'87 GT T-Top(RIP) T-boned by a soccer mom...
'99 Trans Am... 346ci 434whp 452ft/lbs All motor.. Nice weather driver
'07 ZX6R... Track bike
'99 Trans Am... 346ci 434whp 452ft/lbs All motor.. Nice weather driver
'07 ZX6R... Track bike
You can thank me later...
Joined: Aug 2001
Posts: 36,199
Likes: 0
C&S Racing Carburetors - C&S Specialties and ask for Roger for the carb.. Be preparred to pay $1k or more but that bitch will be good out of the box !
He did mine and I sent cochese to him too.
My guess is the size will be 1000cfm or more considering mine is a 890 on my little motor.
He did mine and I sent cochese to him too.
My guess is the size will be 1000cfm or more considering mine is a 890 on my little motor.
__________________
9.31 @ 148.12 ( Drag radials, street driven, low boost, no fancy race car shit....
___________________________________________
TR's Official In House Realtor
PM or E-mail Me If you are Looking To Buy/Sell/Rent A Home.
Special TR Bonus For Using My Services. 
___________________________________________
