No cage!

Well the asshole in the dodge didn't know how to stage so i sat there on the tranny brake for longer then i wanted. No gauge I need one!!!!

I don't think so i'm content with the et but not the 60 if i could get my 60 done to 1.5's or better i'd be very happy. I was told its spinning hard out of the hole but dunno.

 

you wanna try my 27x10.5 Micky ET street bias plys? throw about 8 lbs of air in them. if that bitch dont hook with em then you go some suspension tuning to do brotha.

she looked real flat leaving from the video .. hook and haul hard as she used to. what did you change and why!?!?!?

 

yo my freind busted down a 1.7 60 with stock susp and a set of mt ET's full susp should be like 1.5 or better im guessing but still none the less it was a good run ,, looked to be spinning a bit from out the hole what pressure u runnin in the tires we had about 8.5 in ours "COLD" hooked like hell
best of luck to ya
_Eric

 

whats your pinion angle set at. Ive heard -4 degrees as a good setting. but that setting was on my sn95 cobra, idk about the fox bodies.

 

I have 28's on the car now running 8 pounds in them. Have not changed a thing leads me to think there is something wrong with the converter or tranny .

I ran 8 in them. they are ET drags. And I think it was spinning out of the hole but the guy running the video camera was drunk at 6pm so i'm lucky he could even run the camera let alone tell me what thecar was doing out of the hole.


If I remember it was set at 4.

 

better video's are up.

 

or it's too tight, it doesn't seem to hit very hard out of the hole

 

Dunno It goes 3800 on the tranny brake.

 

mine in the coupe would foot brake that.

 

no sheet....... Well then i'll look in to that.