Fuel rail fittings
Thread Starter
Registered User
Joined: Jan 2004
Posts: 1,895
Likes: 0
Fuel rail fittings
I'm looking for a/n fittings to adapt a braided line to this style of fuel rail (duckbill) but haven't had much luck.
Being that the rail is steel of some sort we are considering welding or maybe soldering on a an adaptor so we can get rid of the stupid hose clamp that holds it currently.
Anyone know where you can get a duckbill to an fitting or have suggestions/comments on trying to weld a standard fitting to the fuel rail itself. (save the take it off the car first comments as after we blew up the first one there will never be that mistake again
)
eBay Motors: SVO,TURBOCOUPE,XR4TI FUEL RAIL W/ BROWN TOP INJECTORS (item 150102014662 end time Mar-19-07 11:45:40 PDT)
Being that the rail is steel of some sort we are considering welding or maybe soldering on a an adaptor so we can get rid of the stupid hose clamp that holds it currently.
Anyone know where you can get a duckbill to an fitting or have suggestions/comments on trying to weld a standard fitting to the fuel rail itself. (save the take it off the car first comments as after we blew up the first one there will never be that mistake again
)eBay Motors: SVO,TURBOCOUPE,XR4TI FUEL RAIL W/ BROWN TOP INJECTORS (item 150102014662 end time Mar-19-07 11:45:40 PDT)
Last edited by plazma; Mar 18, 2007 at 06:19 PM.
is doing your girlfriend
Joined: Dec 2004
Posts: 7,101
Likes: 0
That picture is too small to see anything.
__________________
Governments are instituted among Men, deriving their just powers from the consent of the governed, — That whenever any Form of Government becomes destructive of these ends, it is the Right of the People to alter or to abolish it
Thread Starter
Registered User
Joined: Jan 2004
Posts: 1,895
Likes: 0
There that will show you what a duckbill is. You don't need any more clarity then what it takes to see the fitting type.
Race Photographer
Joined: Nov 2000
Posts: 42,904
Likes: 0
I know UPR makes a conversion fitting for other style fitting with the metal o ring retainer, but never seen anyone make one for that.
__________________
Floridaracing.org Tenative Schedulealso check out the Auto-x Event Schedule
"I am and what I do are not a taxable commodity for you to use and abuse" - Me
This is my fuck the government movement
Floridaracing.org Tenative Schedulealso check out the Auto-x Event Schedule
"I am and what I do are not a taxable commodity for you to use and abuse" - Me
This is my fuck the government movement
has his prioritys ef'd up
Joined: Mar 2004
Posts: 2,450
Likes: 0
Aeromotive makes fittings to adapt Braided lines to the stock fuel body lines. Is this what your talking about?
__________________
Ryan
1990 Mustang GT (In Process)
1993 LX Coupe (Daily Driver, but just choose not to)
2005 Excursion (Big Pig)
Ryan
1990 Mustang GT (In Process)
1993 LX Coupe (Daily Driver, but just choose not to)
2005 Excursion (Big Pig)
Registered User
Joined: Aug 2003
Posts: 1,399
Likes: 0
i have a set of the upr ones at my shop that we use for the v-8's if they are the same
chad
chad
__________________
www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
Thread Starter
Registered User
Joined: Jan 2004
Posts: 1,895
Likes: 0
I wish they were the same but the duckbill style is rare.
The duckbill is the same little clip that holds the fuel line to all of our fuel filters. Little u shaped plastic clip.
We might have to find someone who can silver solder and just do that to a standard a/n fitting.
The duckbill is the same little clip that holds the fuel line to all of our fuel filters. Little u shaped plastic clip.
We might have to find someone who can silver solder and just do that to a standard a/n fitting.
