k-member kits?
Resident Asshole
Thread Starter
Join Date: Jan 2003
Posts: 4,385
Likes: 0
Received 0 Likes
on
0 Posts
aje looked like a nice piece as well. I am not dead set on a qa1 or upr so if you have other suggestion throw them at me. Also where do you get the coil spring itself. I'm having a hard time finding them.
__________________
R.I.P Dad.
The greatest man I've ever known.
6/14/43 - 7/11/06 2:24am
R.I.P Dad.
The greatest man I've ever known.
6/14/43 - 7/11/06 2:24am
has his prioritys ef'd up
Join Date: Mar 2004
Posts: 2,450
Likes: 0
Received 0 Likes
on
0 Posts
D&D sucks monkey nutz, bad fitment issues, they said it was the jig, but how do you have 100,000.00 insurance on a jig that makes shit gets me. Maybe they fixed it, but it was enough to make me decide not to buy from them again. And there customer service was even worse, didnt honor there warranty. If you want best fitment, and will stand up to about anything, most of the guys that run mid level classes are using PA racing. Jason Smith who owns PA is top notch, and will work with you on anything regarding fitment. Such as engine mount placement, level, setback, whatever you need. And you can get his kits at 649.00 plus shipping, which isnt too far from the ballpark, I think he sells full front kits with Strange coil overs, and C/C plate somewhere around the 1100.00 mark. Trust me, you cant go wrong.
__________________
Ryan
1990 Mustang GT (In Process)
1993 LX Coupe (Daily Driver, but just choose not to)
2005 Excursion (Big Pig)
Ryan
1990 Mustang GT (In Process)
1993 LX Coupe (Daily Driver, but just choose not to)
2005 Excursion (Big Pig)
Resident Asshole
Thread Starter
Join Date: Jan 2003
Posts: 4,385
Likes: 0
Received 0 Likes
on
0 Posts
D&D sucks monkey nutz, bad fitment issues, they said it was the jig, but how do you have 100,000.00 insurance on a jig that makes shit gets me. Maybe they fixed it, but it was enough to make me decide not to buy from them again. And there customer service was even worse, didnt honor there warranty. If you want best fitment, and will stand up to about anything, most of the guys that run mid level classes are using PA racing. Jason Smith who owns PA is top notch, and will work with you on anything regarding fitment. Such as engine mount placement, level, setback, whatever you need. And you can get his kits at 649.00 plus shipping, which isnt too far from the ballpark, I think he sells full front kits with Strange coil overs, and C/C plate somewhere around the 1100.00 mark. Trust me, you cant go wrong.
I will definately look into them. thanks.
steve do you have part numbers for the coil springs at summit? Are the specific to mustangs or just universal 14" springs? Thanks
John
__________________
R.I.P Dad.
The greatest man I've ever known.
6/14/43 - 7/11/06 2:24am
R.I.P Dad.
The greatest man I've ever known.
6/14/43 - 7/11/06 2:24am
Registered User
Join Date: Aug 2003
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
i personally love the AJE the best...use it in our own car...i have installed upr kits and have not had aproblem with fitment, i have installed 2 different D&D's and had fitment issues with both...the QA1 stuff is ok as well just sucks that you have to buy their shocks with the coilover kits..call me if i can help u out on either kit
chad
813-784-8248
chad
813-784-8248
__________________
www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
brings his heater.
Join Date: Oct 2002
Posts: 8,314
Likes: 0
Received 0 Likes
on
0 Posts
Registered User
Join Date: Feb 2006
Posts: 4,210
Likes: 0
Received 0 Likes
on
0 Posts
John shop around. i got my QA1 member and tubular arms off Ebay for $275 shipped. Flaming river manual rack for $200 with the shaft. Then I found 12 way adjustable coilovers with the springs on the corral for $225 shipped.
HATES STUPID PEOPLE
Join Date: Jun 2004
Posts: 1,103
Likes: 0
Received 0 Likes
on
0 Posts
can i have them?......I promise ill take good care of everything!
