Need some info on cam shafts
Flowmaster nut swinger
Thread Starter
Join Date: Jan 2005
Posts: 7,535
Likes: 0
Received 0 Likes
on
0 Posts
Need some info on cam shafts
Ok so i have this cam shaft but feel its way to small for 10-8-1 comp 347. I was trading the cam to two different TR member but both of them are cock suckers and changed them mines after making the deal with me. any one have something else that will work you do you think this cam will work well....
__________________
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun
Im runnign a similar sized cam on my 351 with stock heads and i think it is too small.
__________________
Governments are instituted among Men, deriving their just powers from the consent of the governed, — That whenever any Form of Government becomes destructive of these ends, it is the Right of the People to alter or to abolish it
Flowmaster nut swinger
Thread Starter
Join Date: Jan 2005
Posts: 7,535
Likes: 0
Received 0 Likes
on
0 Posts
Thanks gaggots......
__________________
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun
I might have a big cam around 560-580 lift hyd roller. custom isky if I remember right. have the numbers but you would have to call to find out what duration. You can mick it to find lift. it went mid 10's na with the tfs heads I sold. how about 50.00 I'll let you even take it first since we have done business before to get it checked out and then you can pay me if you want it.
__________________
Only 1/4 mile track I know is Gandy Bridge
Only 1/4 mile track I know is Gandy Bridge
try this place... Camshaft Innovations - Home
__________________
'87 GT T-Top(RIP) T-boned by a soccer mom...
'99 Trans Am... 346ci 434whp 452ft/lbs All motor.. Nice weather driver
'07 ZX6R... Track bike
'99 Trans Am... 346ci 434whp 452ft/lbs All motor.. Nice weather driver
'07 ZX6R... Track bike
Flowmaster nut swinger
Thread Starter
Join Date: Jan 2005
Posts: 7,535
Likes: 0
Received 0 Likes
on
0 Posts
I might have a big cam around 560-580 lift hyd roller. custom isky if I remember right. have the numbers but you would have to call to find out what duration. You can mick it to find lift. it went mid 10's na with the tfs heads I sold. how about 50.00 I'll let you even take it first since we have done business before to get it checked out and then you can pay me if you want it.
__________________
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun
Last edited by Na306StAnG; 01-20-2007 at 09:17 PM.