Hmmm WTF think it will work ? (Woot it worked ! )
Guest
Posts: n/a
__________________
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
Guest
Posts: n/a
Wasn't looking to impress.

I have a lot of people to thank in some way or another from over the years and most have stickers.
Whether they sold me the proper bolts or helped with fabbing something I owe all of them a big thanks in my book. Of course as long as it all works ! 
Probably won't put any to play it safe.
Guest
Posts: n/a
SUCCESS BITCHES ! 
My little test proved my theory (for once thankfully
)and some other turbo people (not on TR) wrong.
Now once again just need to try to find some dyno time unless I find some other nit picky stuff to over analyze.

My little test proved my theory (for once thankfully
)and some other turbo people (not on TR) wrong.
Now once again just need to try to find some dyno time unless I find some other nit picky stuff to over analyze.
Guest
Posts: n/a
Nah as I mentioned before I was have oil blow by in the exhaust pipe. After lots of checking and eliminating any motor issues (thank goodness ! ) it pointed to the turbo.
After a lot of calling around and checking with various turbo people it turns out I was feeding the turbo to much oil 80-100 psi..
So good ole TJ and I conferred at Coastal and off to Amazon Hose I went for a fitting. He welded it up and set the hole / restriction to what seemed to be right and back to the house I went. To make sure that was correct I t'd in that pressure gage to make sure I was not starving the turbo or still over oiling. Turns out it was dead on the money for what psi I was told to run in a non ball bearing turbo. Hopefully that number is the correct one
since I am not a oil or fluid dynamics expert.
I just called back a few of the people I talked with and I think I have all of them thinking they need to go out tomorrow and check the oil psi at their turbo given how far some of them are off or by the size tubing they are using.
Again I was probably over analzying this to begin with but it proved very useful in the end.
I should take it to the track with the gage on it, that would confuse the shit out of a few for sure since I have never seen a gage there before on any other car.
Time for a beer and a big fucking sigh of relief !
Awesome man gald you found the bug. That much closer.............
__________________
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun
All American Street Car Performance <--- Facebook page link, check us out!
6187 126th Ave North
Largo fl 33773
MV#72427
(727)535-6905 - Shaun
tell them your checking your bottle pressure, and see how many look for a bottle....
__________________
I am your penalty.....
I am your penalty.....




