Hey guys im looking into ordering some chrome 03 cobras for my 92 coupe lowered with the eibach pro kit(i believe its a 1 1/2 drop) stock brakes,quad shocks still on,with 275 45,17.I was told i should go with 24 mill rims as to avoid them sticking out like alot of wheels do.Since i can not find a 24 mill i did so more searching and found these.Will they work(by work i mean sit flush with the wheel well?Thanks in advance
Brandon Klaiber
http://www.latemodelrestoration.com/...0%201&comp=LRS

EDIT::The 275's will only be run on the back,245's up front

 

they should but your going to need to roll your fenders

 

hey man your not going to get 275 nothing on the back with your quads still on the car, you might be able to get away with flipping them, but a 275-45 is a no go on any fox with quads, dump the quads throw on a set of upper and lower control arms.

 

you can run 275's with the correct will, i ran 275's and only had to flip the quads, but i do agree, get some control arms