i am wondering if an explorer rear end comes stock with 31 spline axels, also will the whole rearend bolt into my sn95, and how much power can i put to it before it breaks?

 

the Explorer rear end is 31 spline and will handle more power than 28s will but won't bolt in an SN95. also, I think those rear ends have an offset differential.

 

so how much will it runn me to do 31 or 33 spline axels in my car?

 

also what kinda labor am i looking at, i am about to drop in my new motor and i think my rear might snap with the 28 spline

also making around 500 wrhp and tq is it nessacary to go to the 31 spline or will the 28 hold up???

 

33 is what i'm doing, and will be making right over 500 at the track

 

im running that same power with 28 spline but wont spray with them call chad at c & c motorsports he will get you a good deal im upgrading with in the next month

 

Yes Expolers are offset, only the drivers side axles will work in mustang. As far as 31 or 33 spine?? Well if you want to get away as cheap as possible then 31 will hold for a bit if you are running Drag Radials, but if you put slicks on it with 500rwhp you may find them to be a bit weak. Good luck on the build