Lowering affect 60ft??
Registered User
Thread Starter
Join Date: Nov 2003
Posts: 7,161
Likes: 0
Received 0 Likes
on
0 Posts
Lowering affect 60ft??
Will lowering my car hurt its 60 ft??....I have stock 4cyl springs and it transfers weight pretty good now..If I lower it will it not weight transfer as good??
Guest
Posts: n/a
Yes, it will take the ability of transferring weight out of your suspension. Unless you have a fully built race car with a ladder set-up you do not want to be to low to the ground.
To low on a non race car will usually get you a lot of wheel hop or spinning.
To low on a non race car will usually get you a lot of wheel hop or spinning.
Registered User
Thread Starter
Join Date: Nov 2003
Posts: 7,161
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by evocrazy1
ladder bars, its a rac setup. like a 4 link i think?
Registered User
Thread Starter
Join Date: Nov 2003
Posts: 7,161
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by evocrazy1
well if you want to know my setup i'll tell i cut 1.63's all day long on a 26 x 10
i have steed aluminum lowers, and upper (rear control arms), GT rear spring with 1/2 coil cut off each. no sway bar, Lakewood 50/50 shocks, in the front no sway bar 4 cyl springs, lakewood 70/30 struts
__________________
ASKED TO BE BANNED
ASKED TO BE BANNED
Heres my car with Moroso drag springs cut.. Very low...
And here is the take off...Cuttin 1.40's 60ft... Straight as an arrow on launch.
Just lucky I guess..