lifters........q
Thread Starter
Chucking up the Dueces
Joined: Jun 2002
Posts: 8,370
Likes: 1
lifters........q
what are ford motorsport hydro roller lifters good for as far as rpm?
Lets say you wanted to rev your motor to 7,500 rpm,will the lifters handle it?Is there a there a rep brand out there,that some of you are running now?
Lets say you wanted to rev your motor to 7,500 rpm,will the lifters handle it?Is there a there a rep brand out there,that some of you are running now?
__________________
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
Thread Starter
Chucking up the Dueces
Joined: Jun 2002
Posts: 8,370
Likes: 1
The Hi-Rev cam series with Hi-Rev valve springs will rev as high as 7600 rpm using the stock Ford hydraulic roller lifters without lifter float; 8200 rpm with titanium retainers, keepers and intake valves.
this is from andersons website.....i guess i'm in the clear
this is from andersons website.....i guess i'm in the clear
__________________
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
Caputo Motorsports-Shawn Caputo
Induction Performance.com
PTC torque converter
Aerospace Components
ProFab Performance
R.I automotive
C.R.T transmisions
5.13@145mph
Need To Get Quicker
Joined: Dec 2001
Posts: 894
Likes: 0
Make sure you have some good oil pressure to keep up with the increased valve spring pressures. I spun my old 302 up to 7600 without a problem. Oil restrictive pushrods don't hurt either.
need turbo stuff,pm me
Joined: May 2004
Posts: 2,728
Likes: 0
hell im @ 7200 in the burnout box!
__________________
IF YOU CAN READ THIS- THANK A TEACHER,
AND SINCE ITS IN ENGLISH, THANK A SOLDIER
"If we ever forget that we're one nation under God, then we will be a nation gone under."
-Ronald Reagan
Florida Cracker Mustang Coupe Whore
IF YOU CAN READ THIS- THANK A TEACHER,
AND SINCE ITS IN ENGLISH, THANK A SOLDIER
"If we ever forget that we're one nation under God, then we will be a nation gone under."
-Ronald Reagan
Florida Cracker Mustang Coupe Whore
Guest
Posts: n/a
What Joe said.
We are using the FMS lifters on my new motor. Granted I took every one of them apart and checked / cleaned up every one of them but Fulco liked how they looked. We are going to pump them up to 70+ lbs of oil psi and per the Ford Motorsport tech line they were built to take 85 lbs..
We are using the FMS lifters on my new motor. Granted I took every one of them apart and checked / cleaned up every one of them but Fulco liked how they looked. We are going to pump them up to 70+ lbs of oil psi and per the Ford Motorsport tech line they were built to take 85 lbs..
