Throttle linkage is catching on my new taller rocker covers, need a spacer for a cobra intake
Let me know i need it like...right now.

 

do you have the egr delete plate in there? If so, I used longer bolts and 5/8" nuts to bring the linkage back in line with the way it pulls the tb. Also with the taller valve covers you may have to raise the plate a bit, just drill new holes about a 1/4" to 3/16" above the stock ones. Puts the linkage ball stud mount just above the cover enough to let it the linkage snap on. I had the same problem as you with the linkage.

 

Nope, no egr delete plate. Just intake mated up with throttle body.
A new spacer is what i need, i guess ill be visiting brandon ford and forkin over 80 bucks for a 1incher!

 

Make sure it will clear your hood. I have a one inch spacer and it is to tall. Had to go with 1/2". Good luck..

 

Trying to get a 3/8 from AEI, and put a couple of spare gaskets together and see if that gives me the proper clearance I need.