10pt Roll Cage
Daddy-O
Join Date: Aug 2001
Posts: 3,300
Likes: 0
Received 0 Likes
on
0 Posts
NBS, Fordspeed, not sure if Coastal does them, Race Related.. I'm sure all shops could help you out and if you're looking for a 10pt, I wouldn't even consider a bolt in..
__________________
I am your penalty.....
I am your penalty.....
Registered User
Join Date: Aug 2004
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
If you only want to spend a couple hundred bucks and not have to take out your entire interior just to pass tech inspection, then get a bolt in like a 6 pt from Maximum Motorsports. But if you really want something that is gonna work as a roll cage and protect you from disaster, then get a weld in 10 pt. NBS would get my vote.
Briane
Briane
__________________
Red 93 GT with only 9000 original miles on it.
HP Performance Stage 1 Street kit with 60mm turbo
Car Pics
11.29 @ 126 mph 16 psi
16 lbs of boost 509 rwhp/626 rwtq
12 lbs of boost 433 rwhp/571 rwtq
********STOCK MOTOR*******
Red 93 GT with only 9000 original miles on it.
HP Performance Stage 1 Street kit with 60mm turbo
Car Pics
11.29 @ 126 mph 16 psi
16 lbs of boost 509 rwhp/626 rwtq
12 lbs of boost 433 rwhp/571 rwtq
********STOCK MOTOR*******
Registered User
Join Date: Dec 2004
Posts: 470
Likes: 0
Received 0 Likes
on
0 Posts
Don't cheap out on a roll bar. If you get a junky one you will hate the car trying to get in and out of it.
At first you think it is cool, then you gain a few pounds and it gets tuff to get in the thing. I hate to think about getting out of my car if it was on fire.
At first you think it is cool, then you gain a few pounds and it gets tuff to get in the thing. I hate to think about getting out of my car if it was on fire.
Guest
Posts: n/a
Bolt in cages are not going to help you much if you are in a wreck but they will appease the track requirements.
Coastal does not do them but one of Sam's partners John Moretti does great work and will be hopefully doing mine soon.
PM me if you wan the number.
Coastal does not do them but one of Sam's partners John Moretti does great work and will be hopefully doing mine soon.
PM me if you wan the number.
Registered User
Join Date: Aug 2003
Posts: 1,399
Likes: 0
Received 0 Likes
on
0 Posts
if you want a very good job you can also call NBS fabrication, they can sell and install, if you just want to purchase one i can sell u one at a good price, email me at n8secstangg@aol.com or you can call nbs at 727-541-1833, speak to andrew
chad
chad
__________________
www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
www.racinginnovationsfl.com
www.xsrcylinderheads.com
4.842@156 and 7.53@192 on radials
MuDuck Racing Inc.
Thread Starter
Join Date: Jan 2005
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys for the great info. A friend and I are going to take care of the installation so I don't need anyone to intsall it. I'm not too concerned about the interior speaking that it's just about stripped. It's going to be a track car anyway.
Oh yeah and Joe, it's either the convert. or mach 1.... I got a new one yesterday. An 89 coupe.
Oh yeah and Joe, it's either the convert. or mach 1.... I got a new one yesterday. An 89 coupe.
Smacking Her A$$
Join Date: Jul 2005
Posts: 867
Likes: 0
Received 0 Likes
on
0 Posts
Josh--You going with a cage for the vert??
Lets Juice up that ride of yours! We still on for Friday night?
I'm just waiting for my c-clip elim to get back from the shop in the afternoon.
Lets Juice up that ride of yours! We still on for Friday night?
I'm just waiting for my c-clip elim to get back from the shop in the afternoon.
