Finally... next weekend is when this bad boy goes together....


pulling for 310rwhp+


Set up is the Following.


BBK Shorties
BBK o/r H
2 chamber Flows Dumped.
3.73's
aluminum Driveshaft
Custom cam... Ed Curtis
Typhoon Intake (ported Lower)
65mm TB (edelbrock)
70mm MAF (pulled off of cobra)
1970D0OE heads
Milled .25
intake opened up to 190cc
reworked bowls, heavy porting on both intake & exhaust
1.94/1.60 manley steel valves.
MSD6A
9mm FRPP wires
Blaster 2 coil
March Aluminum underdrives
Deleted Smog
FMS 1.6 aluminum rockers24lb Injectors
190lph fuel pump


theres probably more that I'll post up later...

I plan on shaving a bit more off the heads (raise the Comp Ratio to about 10:1) reuse his cam and keep the rest as is .....


he made 323rwhp SAE corrected w/o U/d pulleys and had A/C, Smog, and P/S


I want 300rwhp but am hopin for about 330rwhp. and mid to low 12's street tires.


car has quite a bit of weight savings as well.

 

cool beans...post the results when you get them

 

Sweet, hope you meet your goals.