Stewart Scott

Tony, this is the complete harness as if you did not have any injection or EFI at all. The only thing missing is the injector harness which you can use yours. You WILL have to take your harness out and replace with the new one(all the wiring) reuse your injection harness portion which is like a little harness in itself that plugs in.
The mass air is a stock meter out of an 90 or 91 stang. This setup along with a computer you buy from somewhere will be the conversion. If you are not sure about this please do not purchase/I will not sell to you, I don't want to create bad feelings because I will probably see you some time in the future and don't want you to have problems with this and blame me....
You can buy a "jumper" setup and follow instructions which requires you to solder and wire the kit into what you have in place now. It does not require re-wiring of the whole system and like the guys said before takes about an hour or so. You will still need the mass air mater and the computer though. I will sell you the mass air meter for $55 bucks. I am in clearwater, think about this and get back to me.....

tony122

yeah but now the harness you have just plugs in to all the other conections right.like comp to the injection plugs that i can reuse form mine,i can do it i just do not know if the stock one i have on the car if it is joined with a other harness and i have to cut stuff out, but is it pretty eazy to install anyways like i dont need ot remove the upper plenum ou thte way to get to the plugs and stuff?I jus tlook at it on friday if i see its to complicated for me i'll just ge tthe mass and the hardware and the air tube and box from definatly i will get it all or just not the harness.

tony122

wel anyways u got a pic of the harness i can tell ya righ tnow if it would be a pain for me to do lol

351coupe

Yep,Jeff is still there.

tony122

stewart scott hey i am goin to get the harness with the whole thing i am just goin to get the cpu from blue oval he told me 150 auto zone said they take them 5 to 10 days to get one if they can the guy told me their so i need it by friday i will be in clearwater so let me know my number is 813 928 0165

mx-4u2nv

GO TO THE DISCOUNT OFF OF EASTBAY AND YOU WILL HAVE IT BY THE NEXT DAY! IF YOU ARE IN THAT PART OF CLEARWATER

Stewart Scott

OK Tony, complete wire harness, mass air meter (stock), tube and air box......100.00 OK? I will not be around here tomorrow (thurs) I have to go to Lake Mary, Fl. I will be around Friday afternoon. I have your number, here is mine 727.423.7106(cell) We will hook up Friday OK?

tony122

eastbay how do i get their from countrysidemall??

tony122

ok cool 'll give ya a call in the afternon then on friday,thanks.

Stewart Scott

Head south on 19 all the way down to eastbay (St. Rd. 686) make a right and Discount is up about a mile on the right. It is before Belcher so if you go past Belcher you went to far. Actually it is right before Belcher.