I am thinking about running the above mentioned cam with the following:

Edelbrock 600cfm carb
Edelbrock RPM Intake
EdelBrock Performer Heads 1.90/1.60 (Port+Polished)
1.6 r/r
Stock 92 5.0L bottom end

AOD w/2400 stall (otherwise stock)
3.80 rear

Car is a 68 Mustang. Looking for good streetability and good performance (with the later being prefered, I realize there are always comprimises)

Cam specs

* Advertised duration: 266 intake/274 exhaust
* Duration at .050 in.: 216 intake/224 exhaust
* Gross valve lift: .544 in. intake/.555 in. exhaust
* Lobe separation: 112 degrees
* RPM range: 1,600-5,600