Selling my 85 and a motor!
Ok here it goes. Ive got a 1985 White mustang GT. Motor in car is completely stock. Has a off-road H w/turbos.(sounds pretty good. This car is actually quick as hell. Dunno if its the carb but i usually ride out on stock FI stangs to a certain extent. Damn cobras and shit. Not saying its fast but its quick. Car has 16in ponies, also a WC T-5(condition is ok)...Car is very clean for the year other than a few little rust spots on the hatch and some missing paint spots on the front bumper. The car is stripped of everything. And i meen everything. In car are 2 bucket seats with covers, 1 4pt harness, 5in tach, center console and a shifter.
Next ive got a motor i was going to swap into it but somethings come up and I think its all time to be sold.
-E series(80's year) 302 block .30 over
-all clevtie bearings from cam to crank to pistons
-aftermarket pistons
-clevite cam. *488 lift, 220 duration
-E7 heads ported and polished painted black
-Torquer II intake manifold
-1.72 roller rockers. Color is blue and they have beed filed down to ride with stock valve cover clearance
-stock 50 oz balancer(FoMoCo)
-stock reverse rotation timing chain cover
-K&N oil filter
-ive got a AOD w/converter but the OD is gone
-full exhaust-mac 1 5/8 longtubes(used), off-road H with flowmaster 40 series with turn downs after the muffler
- I have all gaskets and seal for the complete build
*Motor is complete other than timing chain cover bolts, other misc. bolts, a fuel pump, and a carb. Also you can hear the 85 run. Im looking for $3,000 obo for everything. May seperate to a certain extent. Im in St. pete My cell is 776-0181. Hit me up if youd like to see it all. The name is Kyle.. Accepting PMs too!
Next ive got a motor i was going to swap into it but somethings come up and I think its all time to be sold.
-E series(80's year) 302 block .30 over
-all clevtie bearings from cam to crank to pistons
-aftermarket pistons
-clevite cam. *488 lift, 220 duration
-E7 heads ported and polished painted black
-Torquer II intake manifold
-1.72 roller rockers. Color is blue and they have beed filed down to ride with stock valve cover clearance
-stock 50 oz balancer(FoMoCo)
-stock reverse rotation timing chain cover
-K&N oil filter
-ive got a AOD w/converter but the OD is gone
-full exhaust-mac 1 5/8 longtubes(used), off-road H with flowmaster 40 series with turn downs after the muffler
- I have all gaskets and seal for the complete build
*Motor is complete other than timing chain cover bolts, other misc. bolts, a fuel pump, and a carb. Also you can hear the 85 run. Im looking for $3,000 obo for everything. May seperate to a certain extent. Im in St. pete My cell is 776-0181. Hit me up if youd like to see it all. The name is Kyle.. Accepting PMs too!
__________________

^^Makes me warm and fuzzzzy

^^Makes me warm and fuzzzzy


