cam questions

Reply Subscribe

Thread Tools

May 5, 2004 | 07:12 AM

#1 (permalink)

Lumberjack

Thread Starter

is made outa laffy taffy

Joined: Jan 2004

Posts: 6,707

Likes: 0

cam questions

i am looking to put a new cam in my stang i have 1.72 roller rockers on it and am thinking about going with the b-303 cam i think anything higher lift of a cam i might have a little problem with valve to piston clearence. are there any other cams i could use with better gains? thanx for your help

__________________

All-American Street Car Performance
6187 126th ave north
Largo Fl 33773
727-667-9346
www.aastreetcars.com

May 5, 2004 | 08:46 AM

#2 (permalink)

BLUE2KSS

Mechanical Engineer

Joined: Nov 2002

Posts: 3,094

Likes: 0

i think you might be able to run the E303.

you still have the stock heads in there right?

__________________

Mechanical Engineer - Naval Surface Warfare Center PCD, Marine Corps. Counter IED Development

USF Formula and Baja racing Alumni/Consultant

May 5, 2004 | 09:05 AM

#3 (permalink)

Lumberjack

Thread Starter

is made outa laffy taffy

Joined: Jan 2004

Posts: 6,707

Likes: 0

yeah stock e-7 heads i beleive. how much of a lift will i be ably to run on stock heads and 1.72 rockers? thanx for your input

__________________

All-American Street Car Performance
6187 126th ave north
Largo Fl 33773
727-667-9346
www.aastreetcars.com

May 5, 2004 | 09:08 AM

#4 (permalink)

Mars_302

Guest

Posts: n/a

b cam and 1.72s will clear fine. E cam and 1.72s is where you gotta worry. Max lift on stock motors is around .530-.540. just depends. And its not all in the lift itself. Its more about the duration.