I had a friend let me use his Desktop dyno 2000 cd.To me it seems to be dead on has anyone else used this cd ?

 

I've got the program but it has neither the 2.2L Mazda motor, nor the ability to have 2 intake/1 exhaust valve. So I don't use it.

Didn't seem like a large program

 

can someone give me specs of there motor cam heads and exhaust combo and there hp numbers from a dyno so i can test this program?

 

I've got the same program on my computer here at the house and it was very, very close to what my car did on the dyno. I also know a couple of friends of mine that entered their engine combinations and they too were almost exactly what the dyno showed. I think the program is pretty good up to a point.

 

Thanx for your input I think the turbo applications are off a little tho

 

Haven't tried anything but N/A combinations on it this far, so I can't really say anything about a turbo, supercharged or nitrous set-up.

 

It's pretty close on the Escort parts too, I jacked my copy off the net though

 

let me know what specs you need, I am curious to see what it says about my combo.

for starters:
4.030 bore
3.00 stroke
9.9/1 compression ratio
GT-40 iron heads, 1.84 int. 1.54 ex. valves
.500" lift
246 duration @.050
110 lobe centers
performer rpm intake
600 cfm holley
1 5/8 long tube headers
let me know what other specs you need

 

Off the top of my head, one of the other things your gonna have to enter are the flow numbers from your heads up to .500 lift.

 

I have those #'s somewhere, if someone says they will run this for me I will dig em up.