T-45 Equipped Mustang Vid With A 7K Juiced Launch !
Guest
Posts: n/a
T-45 Equipped Mustang Vid With A 7K Juiced Launch !
For all of you that bitch and moan about the T-45's here is a post / video I found about them.
Seems if you drive them right them work just fine.
"I edited two runs down to show how you have to baby the little T-45 trans on launch and on the 1-2 shift in these cars. Even I am surprised I've not had any trans problem in 4 years of running the car.
http://www.anythingcars.com/users/jlynch/pen1011.mpg
The shocks are too loose on these two runs. Will try one click stiffer next time.
I had some computer edge connector problems and we had rain and 20 mph head winds, so times were not good--11.5 at 121 but the launches were interesting. "
Even a bad night is fun, LOL.
Seems if you drive them right them work just fine.
"I edited two runs down to show how you have to baby the little T-45 trans on launch and on the 1-2 shift in these cars. Even I am surprised I've not had any trans problem in 4 years of running the car.
http://www.anythingcars.com/users/jlynch/pen1011.mpg
The shocks are too loose on these two runs. Will try one click stiffer next time.
I had some computer edge connector problems and we had rain and 20 mph head winds, so times were not good--11.5 at 121 but the launches were interesting. "
Even a bad night is fun, LOL.
Guest
Posts: n/a
nice, but that doesnt really sound like 7K to me, but i may be wrong, am prolly am
__________________
R.I.P Bryan Asay
Blonde girl 1: "Whasts a hemi?"
Blonde girl 2:"its a truck for a motor"
4 mechanically inclined guys:"what the fuck did you just say?"
R.I.P Bryan Asay
Blonde girl 1: "Whasts a hemi?"
Blonde girl 2:"its a truck for a motor"
4 mechanically inclined guys:"what the fuck did you just say?"
Scott, the guys name is Joe Lynch. I talk to him online alot. Yes it's a t45 in that vid but from what I can remember I think he sprayed at 6k. But what's 1k rpms right? The t45 can take a 7k launch but shifting is where it breaks.
BTW- what's up biotch? Haven't been online as much as I used too. How's the pushrod? -Mark
BTW- what's up biotch? Haven't been online as much as I used too. How's the pushrod? -Mark
__________________
98' cobra
98' cobra
Not 2 shabby
__________________
Yeah it's broken
-Cobra block
-Cobra crank
-Diamond pistons
-Eagle rods
-NOSzle Kit
-Bottle Heater
-QA1 K-Member
-D&D Tubular A-arms
-D&D Coil overs
-1/2' Intake spacer
-Windage tray
-80MM C&L
-K&N Filter
-FR Aluminum drive shaft
-Steeda G-trac bar
-Kenny Brown sub frames
-UPR shifter
-Spec clutch
-Spec Alumn Flywheel
-Steeda Clutch quadrant
-Steeda fire wall adj
-4:10 gear
-Mac upper adj control arms
-Mac Lower control arms
-Mac T/A girdle
-Steeda quad shocks
-Hooker long tubes
-DR.Gas X-pipe
Yeah it's broken
-Cobra block
-Cobra crank
-Diamond pistons
-Eagle rods
-NOSzle Kit
-Bottle Heater
-QA1 K-Member
-D&D Tubular A-arms
-D&D Coil overs
-1/2' Intake spacer
-Windage tray
-80MM C&L
-K&N Filter
-FR Aluminum drive shaft
-Steeda G-trac bar
-Kenny Brown sub frames
-UPR shifter
-Spec clutch
-Spec Alumn Flywheel
-Steeda Clutch quadrant
-Steeda fire wall adj
-4:10 gear
-Mac upper adj control arms
-Mac Lower control arms
-Mac T/A girdle
-Steeda quad shocks
-Hooker long tubes
-DR.Gas X-pipe
Guest
Posts: n/a
Originally posted by bitemark46
BTW- what's up biotch? Haven't been online as much as I used too. How's the pushrod? -Mark
BTW- what's up biotch? Haven't been online as much as I used too. How's the pushrod? -Mark
The new tranny / clutch combo is complete and in.
All the turbo stuff is purchase and ready to go.
Now I am WAITING to get the turbo piping built and installed with some fancy electronics ..
I was wondering where you had been.