5.0L ignition timing
The little 5.0 that could
Thread Starter
Join Date: Apr 2003
Posts: 13,275
Likes: 0
Received 0 Likes
on
0 Posts
5.0L ignition timing
how can i advance my timing a little? can i do it myself? i was told i needed a timing gun ... if i need a special tool, is there anyone or any place that does this kind of thing? if so ... how much would something like that cost?
thanks!
thanks!
Last edited by TheShow50h; 07-14-2003 at 07:17 PM.
Advance it to around 13-14 deg if you haven't touched it at all..
You should only need a timing gun (can pick one up for like $30 at any parts store, Sears) and a 1/2" wrench. Also, when I say 13-14 deg, that's initial (with the spout plug pulled out). Best bet would be to have someone show you.
You should only need a timing gun (can pick one up for like $30 at any parts store, Sears) and a 1/2" wrench. Also, when I say 13-14 deg, that's initial (with the spout plug pulled out). Best bet would be to have someone show you.
__________________
I am your penalty.....
I am your penalty.....
The little 5.0 that could
Thread Starter
Join Date: Apr 2003
Posts: 13,275
Likes: 0
Received 0 Likes
on
0 Posts
do you think that fordspeed could do it for me? i guess ill give them a call 2morrow, im sure it couldnt cost too much or take too long at all. thanks strokd85
__________________
-Vince
-Vince
Give me a call at the shop tomorrow and let me know when you would like to stop by. It'll only take a few minutes and I'll take care of it for you.
Last edited by T/S #25; 07-15-2003 at 01:59 PM.
Originally posted by T/S #25
Give me a call at the shop tomorrow and let me know when you would like to stop by. It'll only take a few minutes and I'll take care of it for you.
Give me a call at the shop tomorrow and let me know when you would like to stop by. It'll only take a few minutes and I'll take care of it for you.
Will you show me how to set my base timing and perhaps retard it too?
I've never done it before, so it would be nice to have somebody show me how to do it the right way.
__________________
"There's more flawless engineering in a Camry than all the berlinettas Enzo ever conjured while lying next to mistresses." - John Phillips/Car and Driver
The swapped hatch hotness
Slow Five-Oh Rustang
"There's more flawless engineering in a Camry than all the berlinettas Enzo ever conjured while lying next to mistresses." - John Phillips/Car and Driver
The swapped hatch hotness
Slow Five-Oh Rustang
Becareful how far you advance it... You may run into OverHeating problems....
__________________
Sn95' Tripple Black Cobra
Mods:Heads/Cam/Intake/Exhaust...just your typical stock mustang...
Sn95' Tripple Black Cobra
Mods:Heads/Cam/Intake/Exhaust...just your typical stock mustang...
Originally posted by T/S #25
Give me a call at the shop tomorrow and let me know when you would like to stop by. It'll only take a few minutes and I'll take care of it for you.
Give me a call at the shop tomorrow and let me know when you would like to stop by. It'll only take a few minutes and I'll take care of it for you.
Matt
__________________
AIM- Wildcard302
AIM- Wildcard302