4 weeks left! what are you doing to prepare?
Originally posted by n2ocamry
actually during front suspension install i hit a snag
none of the mother fuckin bolts wouuld come off
and the ones that did went strippeded
and the ones that wouldnt come out had to be drilled
which led to a big fuck up
so i now need 2 new struts for my 86 and possibily 2 new brakelines
but hey i fixed my tach fuse
actually during front suspension install i hit a snag
none of the mother fuckin bolts wouuld come off
and the ones that did went strippeded
and the ones that wouldnt come out had to be drilled
which led to a big fuck up
so i now need 2 new struts for my 86 and possibily 2 new brakelines
but hey i fixed my tach fuse
i didnt fuck up the struts
i fucked up the strut casings
yes yes everyone thats right
the things that the struts go into
the things that they no longer make
the things that i have to get off a junked 86
im fucked
oh yeah and the brake lines ARE fucked also
but stainless steels are on the way (as soon as i buy them)
so if anybody has any spare 86 front strut casings laying around ill buy them, borrow them, accept them as a fellow drifter gift,
whatever gets me to dday
Originally posted by neurovish
I hope you paid a visit to our dear friend peanut instead of going to some fly-by-night redneck place
...now if only I could find my rear swaybar mounts....
I hope you paid a visit to our dear friend peanut instead of going to some fly-by-night redneck place

...now if only I could find my rear swaybar mounts....
what about rear sway mounts now? you still need me to pick those up for you?
Originally posted by agemomai
peanut only hooks you up if you make with the lovemaking, and i just wasnt in the mood.
what about rear sway mounts now? you still need me to pick those up for you?
peanut only hooks you up if you make with the lovemaking, and i just wasnt in the mood.
what about rear sway mounts now? you still need me to pick those up for you?

I hope kris still works there and remembers what's going on
ok bad news
i will not be drifting at dday-due to lack of funds
FUCKAROONEY
list of shit that needs to be fixed
-lower control arms (goin with celicas)
-braided brake lines (cause i broke mine)
-brembo cross drilled rotors (cause mine are warped)
-2.5 steering rack (cause i broke mine plus the elbows and ball joints are fucked)
-bolts galore cause all mine are bent
-helmet
i figure it to be around $700 total
and im broke and 3 weeks is not enough time for $700 freelance
dollars,
so im not bustin ass and im just gonna work it slow and clean it all up while im under there
so basically have fun guys but ill be there watchin
i will not be drifting at dday-due to lack of funds
FUCKAROONEY
list of shit that needs to be fixed
-lower control arms (goin with celicas)
-braided brake lines (cause i broke mine)
-brembo cross drilled rotors (cause mine are warped)
-2.5 steering rack (cause i broke mine plus the elbows and ball joints are fucked)
-bolts galore cause all mine are bent
-helmet
i figure it to be around $700 total
and im broke and 3 weeks is not enough time for $700 freelance
dollars,
so im not bustin ass and im just gonna work it slow and clean it all up while im under there
so basically have fun guys but ill be there watchin
__________________
im a one legged man because of iraq but that does not stop me from loving the drift
im a one legged man because of iraq but that does not stop me from loving the drift
motor swap should be done and running tomorrow...
tuning monday-tuesday
ebrake cable just arrived, gotta install
azenis' ordered, awaiting arrival
T3 NCRCAs ordering in about a week
finally an alignment and i should be good.
tuning monday-tuesday
ebrake cable just arrived, gotta install
azenis' ordered, awaiting arrival
T3 NCRCAs ordering in about a week
finally an alignment and i should be good.
__________________
http://www.floridaracing.org

Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
http://www.floridaracing.org

Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
Originally posted by Shadytrixta1
Hey jesse what kind of suspension goodies are you getting.
Hey jesse what kind of suspension goodies are you getting.
wait.. Im back in the game.. I got me a helmet !
Now I need to order my radiator and susp, Ill probably be drifting stock susp unless Tay helps me out
and rocking some fatty wheels..
Now I need to order my radiator and susp, Ill probably be drifting stock susp unless Tay helps me out
and rocking some fatty wheels..
__________________
Originally posted by n2ocamry
bring me a license plate
*joke
bring me a license plate
*joke
Charles
__________________

1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com

1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com
just got 8 bran new tires mounted and balanced courtesy of my sponsor Combustion Inc. that and a Hicas rear sway bar and a real double N1 exhaust and i'm ready to go. hopefully i'll be caged, but i'm not holding my breath.
__________________




