New best for the Sedan
New best for the Sedan
The track was really busy because it was the first test and tune since Gator Nationals and i only got a chance to make 3 passes. It was my first time on nitto drag radials and it felt better with each pass....i just need more practice, i think i should be able to get the 60' down to at least a 2.0 and hopefully run like a 13.4. Also these runs were made with full exhuast and with open testpipe on the dyno my car made an additional 4hp and 4 lbs of tq.
Setup and dynos:
http://www.honda-tech.com/zerothread?id=768541
Mods:
-Gsr shortblock with oversized ITR pistons
-ITR head milled 20 tho
-Toda Header
-AEB intake manifold
-ITR TB
-Apex-i N1 catback with testpipe
-Jun cam gears
-Home Depot Special CAI
-Hondata S100
__________________
https://www.tamparacing.com/gallery/...r=9231&thumb=1
13.20@105 NA/OEM Internals 4Doors
https://www.tamparacing.com/gallery/...r=9231&thumb=1
13.20@105 NA/OEM Internals 4Doors
Nice runs..your car really impressed me. i was there with the black integra... with the stock type R motor.... my best run on the night was a 14.54
r/t 1.224
60ft 2.389
1/4 14.54
mph 97.41
my heavy ass 17's with shitty kumho's didnt help the launches
i am going back friday night... hopefully with some smaller wheels if not drag radials
Chris
r/t 1.224
60ft 2.389
1/4 14.54
mph 97.41
my heavy ass 17's with shitty kumho's didnt help the launches
i am going back friday night... hopefully with some smaller wheels if not drag radials
Chris
__________________
Chris...
aim- topendchris
kissxthexskys: what comes after 2299
kissxthexskys: 2300?
Top End Chris: seriously
Top End Chris: did u just ask that
Chris...
aim- topendchris
kissxthexskys: what comes after 2299
kissxthexskys: 2300?
Top End Chris: seriously
Top End Chris: did u just ask that
oh ok yeah you were behind me in line the whole nite, your times are actually pretty good for that wheel/tire setup. you really need some 15's with drag radials and you'll be i the 13's i bet
__________________
https://www.tamparacing.com/gallery/...r=9231&thumb=1
13.20@105 NA/OEM Internals 4Doors
https://www.tamparacing.com/gallery/...r=9231&thumb=1
13.20@105 NA/OEM Internals 4Doors
Originally posted by FerioVtec94
oh ok yeah you were behind me in line the whole nite, your times are actually pretty good for that wheel/tire setup. you really need some 15's with drag radials and you'll be i the 13's i bet
oh ok yeah you were behind me in line the whole nite, your times are actually pretty good for that wheel/tire setup. you really need some 15's with drag radials and you'll be i the 13's i bet
Steve
__________________
R.I.P.
'01 3.5 CL typeS
pb 13.306@105.83
dyno'd 3-19(coastal)
257.1/231.5
taste the rainbow
R.I.P.
'01 3.5 CL typeS
pb 13.306@105.83
dyno'd 3-19(coastal)
257.1/231.5
taste the rainbow
are you refering to me or typegsR
__________________
https://www.tamparacing.com/gallery/...r=9231&thumb=1
13.20@105 NA/OEM Internals 4Doors
https://www.tamparacing.com/gallery/...r=9231&thumb=1
13.20@105 NA/OEM Internals 4Doors
I found some 15 in drag radials on saturn steelies i am picking them up tomorrow morning..
__________________
Chris...
aim- topendchris
kissxthexskys: what comes after 2299
kissxthexskys: 2300?
Top End Chris: seriously
Top End Chris: did u just ask that
Chris...
aim- topendchris
kissxthexskys: what comes after 2299
kissxthexskys: 2300?
Top End Chris: seriously
Top End Chris: did u just ask that
Originally posted by FerioVtec94
are you refering to me or typegsR
are you refering to me or typegsR
__________________
R.I.P.
'01 3.5 CL typeS
pb 13.306@105.83
dyno'd 3-19(coastal)
257.1/231.5
taste the rainbow
R.I.P.
'01 3.5 CL typeS
pb 13.306@105.83
dyno'd 3-19(coastal)
257.1/231.5
taste the rainbow
very impressed with those time run some slicks launch hard i bet u could hit 12sec, my best 60ft on slicks was a 2.0xx,i didnt want to hit it too hard i had to drive that car home ...
yeah i think i could have got her down to a 13.4 the way it was last night and it always runs faster on the track with open header so maybe a 13.3 or so like that
hopefully a 12.9 eventually on slicks, i think it has enough power i just need to gut it and get a really good 60' to get what i want, its just gonna take alot more practice, that was the first 3 runs i've ever made on drag radials
hopefully a 12.9 eventually on slicks, i think it has enough power i just need to gut it and get a really good 60' to get what i want, its just gonna take alot more practice, that was the first 3 runs i've ever made on drag radials
__________________
https://www.tamparacing.com/gallery/...r=9231&thumb=1
13.20@105 NA/OEM Internals 4Doors
https://www.tamparacing.com/gallery/...r=9231&thumb=1
13.20@105 NA/OEM Internals 4Doors