Hey V8 guys

Reply Subscribe

Thread Tools

Mar 9, 2003 | 08:59 AM

#11 (permalink)

FearThe4Doors

Guest

Posts: n/a

i guess when building a new engine.. you gotta wait till the end to pick pushrods anyway

Mar 9, 2003 | 09:01 AM

#12 (permalink)

sb408dart

Registered User

Joined: Mar 2003

Posts: 0

Likes: 0

Magnum small blocks use 7 5/8, 7.625 rods, but they are oiled through the pushrods, have holes through em like a chevy.

__________________
Honestly... it's a 318.

Mar 9, 2003 | 09:03 AM

#13 (permalink)

sb408dart

Registered User

Joined: Mar 2003

Posts: 0

Likes: 0

Better measure em with a caliper, pretty small numbers.

__________________
Honestly... it's a 318.

Mar 9, 2003 | 09:07 AM

#14 (permalink)

FearThe4Doors

Guest

Posts: n/a

the dia's i did. the length i just had a ruler

Mar 9, 2003 | 09:09 AM

#15 (permalink)

sb408dart

Registered User

Joined: Mar 2003

Posts: 0

Likes: 0

If you get the engine all together, check how the rockers sit on the valves with machinist blue, if it works, then it works.

__________________
Honestly... it's a 318.

Mar 9, 2003 | 09:11 AM

#16 (permalink)

FearThe4Doors

Guest

Posts: n/a

ok, i'll put the pushrod IDing on hold.

thanks for the help

Reply Subscribe

Reply Share

First
Prev
2 / 2
Next
Last