K is Fuxored...

Reply Subscribe

Thread Tools

Oct 20, 2002 | 06:56 PM

#1 (permalink)

mpbiv

Thread Starter

Rod Bearing Eater

Joined: Apr 2002

Posts: 27

Likes: 0

K is Fuxored...

bandwagon pwns j00

+1

__________________
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)

Oct 20, 2002 | 07:01 PM

#2 (permalink)

leadfootedfool

Eat soot

Joined: Oct 2001

Posts: 1

Likes: 0

And so does the good call on shutting off the engine with no oil and saving it.

However, forgetting to put the bolt in does not

__________________

Oct 20, 2002 | 07:20 PM

#3 (permalink)

mpbiv

Thread Starter

Rod Bearing Eater

Joined: Apr 2002

Posts: 27

Likes: 0

Quote:

Originally posted by "leadfootedfool"

And so does the good call on shutting off the engine with no oil and saving it.

However, forgetting to put the bolt in does not

Nice try but your kind of off, the drain plug was in, it vibrated out at 70+ mph. This was on my way back from the FL mall on the turnpike. Guess those balance shafts were important

__________________
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)

Oct 20, 2002 | 08:37 PM

#4 (permalink)

CrazyMoparGirl

Guest

Joined: Sep 2001

Posts: 997

Likes: 0

quit yer bitching

Oct 20, 2002 | 10:49 PM

#5 (permalink)

FearThe4Doors

Guest

Posts: n/a

ok, so he DID put it in. Tightening pwns j00

Oct 21, 2002 | 04:53 AM

#6 (permalink)

CrazyMoparGirl

Guest

Joined: Sep 2001

Posts: 997

Likes: 0

Tight is very good, loose is not, remember that, if it's loose it's time for a retread.

Oct 21, 2002 | 06:50 AM

#7 (permalink)

mpbiv

Thread Starter

Rod Bearing Eater

Joined: Apr 2002

Posts: 27

Likes: 0

Also I switched from using RTV to seal it to a little rubber o ring that was supposed to seal it, I think the RTV works better. Consequently I think I forgot to torque er down good.

__________________
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)