Chrysler, Dodge, Plymouth, Eagle Tech Chrysler, Dodge, Plymouth, Eagle

95 dodge caravan 3.0 not firing...need help

Thread Tools
 
Old Jul 19, 2008 | 08:12 AM
  #1 (permalink)  
G-Ready's Avatar
Thread Starter
-Jersey-
 
Joined: Apr 2003
Posts: 964
Likes: 0
Default 95 dodge caravan 3.0 not firing...need help

the water pump went out on this vehical. Before the van was running perfect other then the obvious water pump leaking. After the install of the new water pump everything was reassembled. Now the van wont fire, I checked all the spark plug wire and each are getting power, i replaced the spark plugs as it needed a tune up. I triple checked all wire plugs unhooked to make sure they where secure and in place. i can only assume the timing is off, but i dont have a large amount of experiance dealing with timing. help would be appreciated. or if anyone has other suggestions as to the issue they would be welcomed.
__________________
Warning: This post may be subject to possible misinterpretation!
Sarcasm Warning: Content may not be suitable for viewers without a sense of humor or irony!
http://www.myspace.com/fugheddaboudit
Reply
Old Jul 22, 2008 | 10:39 AM
  #2 (permalink)  
tampatsi21's Avatar
Ian
 
Joined: Apr 2005
Posts: 461
Likes: 0
Default

sounds like the timing is out, other than that check to make sure everything got plugged back in correctly. here is a pic of the timing setuo if you dont have one already.
Reply
Old Jul 29, 2008 | 01:30 PM
  #3 (permalink)  
91Notch's Avatar
Is workin on his car
 
Joined: Jun 2006
Posts: 1,864
Likes: 0
Default

Yup it sounds like you didnt get the timing back on right.
Reply




All times are GMT -8. The time now is 01:27 AM.