i am looking for the three bolts that go into the stock mopar surge valve. looking to put on my block off plate and the mopar blue plate bolts are too long. need these ASAP. LMK thanks

 

Take one of the bolts out of the mopar plate and go to the hardware store and buy shorter bolts. Thats what I had to do. It cost me like $.90.

 

what length did u get 10mm ?

 

hell, just take a grinder and cut them down, I've done it before...actually all you need to do is measure for the length you need...most likely they are m8 or m6 with a 1.5mm pitch on a guess...like most neon bolts

 

I just eyed it. They need to be farly short otherwise one of them will hit the compressor housing. All you have to do is get bolts that are a couple of mm longer than the block off plate. I took my plate with me just to check.

 

i'm heading to home depot to pick them up tomorrow

 

I pick up all my hardware at ACE...home depot usually has some pretty crappy bolts...also its hard to metric bolts there