SRT IC measurements....
Rod Bearing Eater
Thread Starter
Join Date: Apr 2002
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
SRT IC measurements....
Who's got them? Need total length, height, and depth of the whole unit.
__________________
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
15 seconds EXHILARATION
Join Date: Jun 2002
Posts: 7,801
Likes: 0
Received 0 Likes
on
0 Posts
Yes, it's nice that factory cars are coming with front mounts these days. Now it's just a matter of time 'till they start showing up in junkyards to benefit the older and less fortunate 
.
.
Rod Bearing Eater
Thread Starter
Join Date: Apr 2002
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Yeah except I don't plan to wait until they hit the junkyards........
__________________
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
keyboard hardass
Join Date: Dec 2000
Posts: 12,969
Likes: 0
Received 0 Likes
on
0 Posts
I cant find anything online about them yet, and i'm sur they wont have any laying around in the parts dept yet.. :/
__________________
Offroading Spots near Tampa
Green markers = Pay spots
Blue markers = safe free spots
Red markers = not so safe free spots (possible trespass issues)
Offroading Spots near Tampa
Green markers = Pay spots
Blue markers = safe free spots
Red markers = not so safe free spots (possible trespass issues)
Skittle on crack!
Join Date: Mar 2002
Posts: 1,584
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Billy
Core is 24" wide 7" high and about 2.75" thick
Core is 24" wide 7" high and about 2.75" thick
I think its closer to 3in thick though
__________________
You can quit watching me now....
You can quit watching me now....
Rod Bearing Eater
Thread Starter
Join Date: Apr 2002
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
They may not stock them at the dealer but you can order them through them, already seen one put into a daytona. Thanks Billy, but maybe I should have been more specific when I said total length. I need the length of the whole unit including the endtanks.
Wondering if it would fit between my headlights in the grill opening.
Wondering if it would fit between my headlights in the grill opening.
__________________
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Skittle on crack!
Join Date: Mar 2002
Posts: 1,584
Likes: 0
Received 0 Likes
on
0 Posts
Well add about 5 in on each side for end tanks.
BTW:
Have u heard the dealer price on parts for this thing?
hood is 2K+
Rubber hose on the hot side is $250! ( 2ft rubber hose)
RIM is $330
:o :o
BTW:
Have u heard the dealer price on parts for this thing?
hood is 2K+
Rubber hose on the hot side is $250! ( 2ft rubber hose)
RIM is $330
:o :o
__________________
You can quit watching me now....
You can quit watching me now....
Rod Bearing Eater
Thread Starter
Join Date: Apr 2002
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I heard the intercooler is in the ~500 range and the turbo/manifold assembly is in the 500-600 range. Not sure though. For 550 I could easily get a high flow spearco IC from FWDPerformance.
__________________
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
Patrick
05 SRT-4: Daily Driver, 11.9@117.4
88 Aries: 2.2L Turbo (Powered by Megasquirt II)
