FS/FT: TWO Integras for one car. One is a DD the other is 540+Hp Race car!
Registered User
Thread Starter
Join Date: Oct 2006
Posts: 5,087
Likes: 0
Received 0 Likes
on
0 Posts
FS/FT: TWO Integras for one car. One is a TURBO DD the other is 540+Hp Race car!
I am looking to sell or mostly want to trade both of my cars for a single DD. I'm interested in a s2000, RSX-s, Nissan 350z or others, just throw me some offers, worst i can say is no.
First up is my built teggy. This is my 1995 Integra GSR.
NO AC (Nothing under the dash or in engine bay), NO PS, NO ABS (converted to non abs).
It has 8/10 Black leather interior with a small tear on the driver seat, ! Does not have the wheels that are on the car! It has white GSR blades on rear with good tires, and a set of Rims with worn out MT's on the front. IT WILL COME WITH the other front blades (black) with M&H 235/60/15's to match the rears...
Darton sleeved b18c1 bored to 84mm w/ copper O-rings
CP 9.0:1 comp pistons
Eagle H-beam rods
OEM Honda oil pump
OEM Honda water pump
ARP rod bolts
Balanced and blueprinted b18c1 crank
ARP head studs
ARP main bolts
Golden Eagle (honda oem) 84mm head gasket
Ferrea valves (stock size)
Supertech valve springs and titanium retainers
Honda oem valve stem seals
Stock GSR cams Skunk2 cam gears
Precision SC6266sp v-band (new)
Vecco 28”/8”/3” Intercooler
NGK Wires
NGK Platinum Spark Plugs
CC-Fab ram horn manifold
3 inch v-band down pipe
50mm Synapse Engineering wastegate
BBK Single Stage intake manifold
BBK 70mm
Golden Eagle pro-series fuel rail
Golden Eagle Thermal Intake Manifold gasket
Precision 1000cc Injectors
Aeromotive FPR w/ fittings
FULL BLOWN Dual Walbro 255
AEM Uego wideband
Autometer Boost Gauge
Autometer oil pressure gauge
Autometer Gauge pod
Half Dual Core civic radiator
SPAL 13" 1710cfm Slim Fan (i love this thing)
Innovative Race Mounts
Avid Torque Mounts
Synapse synchronic bov
Vented block and valve cover
B&R fittings custom catch tank
GSR Tranny w/Type-R LSD
Action Dual Finger pressure plate w/6puk sprung disc
ACT Prolite 9lb flywheel
Hondata s300 with boost control
Skunk2 Coilover with KYB AGE shocks in front
SKunk2 Coilover Drag Launch Kit In rear
CONS:
3rd gear grind
needs retune with the new bigger turbo, but a/fs are spot on at 10lbs
uncomfortable as shit.
PICS:
HOW THE CAR SITS ON BLADES.
TRACK VID ON PUMP GAS and TIME SLIP:
95dc2teg Quest for 10's on PUMP gas - YouTube
95dc2teg (Anthony) at Bradenton Street Heat 4-9-11 - YouTube
Same exact setup, different shell, dyno vid and sheets
Pump Gas:
Race Gas (112 oct):
VID:
phearable's Channel - YouTube
NEXT UP IS MY DD INTEGRA SPECIAL EDITION
FS/FT is my 1995 Acura Integra Special Edition Turbo. It still retains ac, ps, pl, pw, cc etc. It has 201k on the odometer. the previous owner says the motor was rebuilt but I have no proof. Only proof that i have that this motor is healthy is that it doesn't smoke or leak. It was tuned by John Vega @ phearable.net and made 307whp and 283tq on 17lbs. This car is my daily and drives great! I am a tech at Honda and recently done this maintenance to the car with OEM HONDA parts:
Honda Timing Belt
Honda Water pump
Honda Oil pump
Honda Oil pan gasket
Honda Rear main seal
Honda Cam Seals
Honda Head gasket
Honda axle seals
Honda Cap/Rotor
Honda Spark plug wires
Honda Distributor O-ring
Honda Battery
Honda Valve cover gasket Kit
Honda Brake fluid flush
Honda Power steering flush
Alignment
Honda Oil changes/filters
I have receipts from Honda for all the parts purchased.
Engine/Turbo Setup:
STOCK LS MOTOR/trans
Ngk BKR7E plugs
Wrinkle Black Painted 96-01/B20 Valve cover
Yonaka motorsports Stage 5 Clutch
JFAB Manifold and 2.5" DOWNPIPE
spoon replica 2.5" cat
2.5" Yonaka motorsports exhaust
EMUSA 50 Trim turbo
EMUSA 38mm wastegate
Vibrant Manual boost controller
Greedy replica BOV
DSM 450cc injectors
Walbro 255 Fuel Pump
ARP Head Studs
Plug N Play Honda resistor box
JFAB Intercooler PIPING
eBay 28/6/2.5 Intercooler
Spal 12 " slim fan with stock oem plug soldered on puller
10" slim fan with stock oem plug setup as pusher
8k Slim ballast HID
Interior:
MINT BLACK LEATHER GSR interior as well with NO TEARS
ITR replica Floor mats
COLD AC
SONY CD PLAYER with AUX and USB port
Wired for amp/subs
Exterior:
98-01 Front end
98-01 Rear all red taillights
Needs paint
Mint GSR BLADES
80% Nitto neogens
eBay Stanley replica Side markers
Stock springs/Shocks (Pics show lowered on H&R springs)
Pictures:
Dyno vid:
First up is my built teggy. This is my 1995 Integra GSR.
NO AC (Nothing under the dash or in engine bay), NO PS, NO ABS (converted to non abs).
It has 8/10 Black leather interior with a small tear on the driver seat, ! Does not have the wheels that are on the car! It has white GSR blades on rear with good tires, and a set of Rims with worn out MT's on the front. IT WILL COME WITH the other front blades (black) with M&H 235/60/15's to match the rears...
Darton sleeved b18c1 bored to 84mm w/ copper O-rings
CP 9.0:1 comp pistons
Eagle H-beam rods
OEM Honda oil pump
OEM Honda water pump
ARP rod bolts
Balanced and blueprinted b18c1 crank
ARP head studs
ARP main bolts
Golden Eagle (honda oem) 84mm head gasket
Ferrea valves (stock size)
Supertech valve springs and titanium retainers
Honda oem valve stem seals
Stock GSR cams Skunk2 cam gears
Precision SC6266sp v-band (new)
Vecco 28”/8”/3” Intercooler
NGK Wires
NGK Platinum Spark Plugs
CC-Fab ram horn manifold
3 inch v-band down pipe
50mm Synapse Engineering wastegate
BBK Single Stage intake manifold
BBK 70mm
Golden Eagle pro-series fuel rail
Golden Eagle Thermal Intake Manifold gasket
Precision 1000cc Injectors
Aeromotive FPR w/ fittings
FULL BLOWN Dual Walbro 255
AEM Uego wideband
Autometer Boost Gauge
Autometer oil pressure gauge
Autometer Gauge pod
Half Dual Core civic radiator
SPAL 13" 1710cfm Slim Fan (i love this thing)
Innovative Race Mounts
Avid Torque Mounts
Synapse synchronic bov
Vented block and valve cover
B&R fittings custom catch tank
GSR Tranny w/Type-R LSD
Action Dual Finger pressure plate w/6puk sprung disc
ACT Prolite 9lb flywheel
Hondata s300 with boost control
Skunk2 Coilover with KYB AGE shocks in front
SKunk2 Coilover Drag Launch Kit In rear
CONS:
3rd gear grind
needs retune with the new bigger turbo, but a/fs are spot on at 10lbs
uncomfortable as shit.
PICS:
HOW THE CAR SITS ON BLADES.
TRACK VID ON PUMP GAS and TIME SLIP:
95dc2teg Quest for 10's on PUMP gas - YouTube
95dc2teg (Anthony) at Bradenton Street Heat 4-9-11 - YouTube
Same exact setup, different shell, dyno vid and sheets
Pump Gas:
Race Gas (112 oct):
VID:
phearable's Channel - YouTube
NEXT UP IS MY DD INTEGRA SPECIAL EDITION
FS/FT is my 1995 Acura Integra Special Edition Turbo. It still retains ac, ps, pl, pw, cc etc. It has 201k on the odometer. the previous owner says the motor was rebuilt but I have no proof. Only proof that i have that this motor is healthy is that it doesn't smoke or leak. It was tuned by John Vega @ phearable.net and made 307whp and 283tq on 17lbs. This car is my daily and drives great! I am a tech at Honda and recently done this maintenance to the car with OEM HONDA parts:
Honda Timing Belt
Honda Water pump
Honda Oil pump
Honda Oil pan gasket
Honda Rear main seal
Honda Cam Seals
Honda Head gasket
Honda axle seals
Honda Cap/Rotor
Honda Spark plug wires
Honda Distributor O-ring
Honda Battery
Honda Valve cover gasket Kit
Honda Brake fluid flush
Honda Power steering flush
Alignment
Honda Oil changes/filters
I have receipts from Honda for all the parts purchased.
Engine/Turbo Setup:
STOCK LS MOTOR/trans
Ngk BKR7E plugs
Wrinkle Black Painted 96-01/B20 Valve cover
Yonaka motorsports Stage 5 Clutch
JFAB Manifold and 2.5" DOWNPIPE
spoon replica 2.5" cat
2.5" Yonaka motorsports exhaust
EMUSA 50 Trim turbo
EMUSA 38mm wastegate
Vibrant Manual boost controller
Greedy replica BOV
DSM 450cc injectors
Walbro 255 Fuel Pump
ARP Head Studs
Plug N Play Honda resistor box
JFAB Intercooler PIPING
eBay 28/6/2.5 Intercooler
Spal 12 " slim fan with stock oem plug soldered on puller
10" slim fan with stock oem plug setup as pusher
8k Slim ballast HID
Interior:
MINT BLACK LEATHER GSR interior as well with NO TEARS
ITR replica Floor mats
COLD AC
SONY CD PLAYER with AUX and USB port
Wired for amp/subs
Exterior:
98-01 Front end
98-01 Rear all red taillights
Needs paint
Mint GSR BLADES
80% Nitto neogens
eBay Stanley replica Side markers
Stock springs/Shocks (Pics show lowered on H&R springs)
Pictures:
Dyno vid:
__________________
#32!!
**If you are apart of the DC Crew and would like a DC crew Sticker shared_pm me!!**
#32!!
**If you are apart of the DC Crew and would like a DC crew Sticker shared_pm me!!**
Last edited by 95dc2teg; 08-31-2012 at 07:25 PM.
Registered User
Thread Starter
Join Date: Oct 2006
Posts: 5,087
Likes: 0
Received 0 Likes
on
0 Posts
^ thanks guys. I figured i might as well just get one nice car. I got into a little trouble with the black car last night =(
__________________
#32!!
**If you are apart of the DC Crew and would like a DC crew Sticker shared_pm me!!**
#32!!
**If you are apart of the DC Crew and would like a DC crew Sticker shared_pm me!!**
