240sx for trade pics
i like this car but putting too much money into it, i need a dd and i dont wana spend no more money..
5 speed ka24e
no grinds nor smoke =)
1989 nissan 240sx
new clutch kit (stock)
new throw out bearing
new stater
new alternator
new spark plugs and wires
new battery
new fuel injectors
new timing chain and guide
new battery terminals
2 10" flex-lite fans
with a relay that controls them..
secondary butterfly were remove cuase this car is set for turbo (so it does idle)
aftermarket headers 3" exhaust all the way, (straight pipe)
lowered on some springs
no a/c or p/s
heater tho is good
p/w windows works =)
one motor mounts is bad passenger side
missing side view mirror
motor, new head mani and exhuast gasket
head straight out out from the machine shop i have the receipt
block has 76,000 miles on it, cylinder walls are perfect forgot to take a pick of it
motor has good compression runs good, just needs to get lubricated
this motor was built a week ago and i got it running yesterday 3/8/11
the reason i want to get rid of it is because i dont want to invest no more money into it... it needs a new oil pump and a new radiator cap, the valve arent getting lubricated meaning it needs a new pump. my camshaft craked in half and it was the same promblem but i dint my oil pump was bad, so i kept on driving it and clack! broken camshaft..
so i had to get a new one and its was put on the machine shop, this car with the new oil pump it would run perfect! i dont wana work on the car.. tired of it, so if anybody wants the 240 lmk
body is good, 8/10 barely any dents just has one on the lower driver side quarter panel, and it need a paint job
sunroof is good no leaks
interior is clean, just crack dash
with allt he money i put into it, this car has potential! i would stay with it but im tired of working on it..
would trade a honda and has to be 5 speed
located in orlandooooooooooooooooooooo
















if u want more pics just call or text me ok andres
also have a b18a1 for sale parted out long block for 250, needs flywheel but everything in the motor is good, head and block oh and its has 95,000 hard to believe huh? believe or not.. this motor was running just got parted out cause it was going to get built but never was worked on



wireharness included with mani u will need to buy new gaskets for the motor and probably new head studs (i would) $250 firm need money asap pm me
5 speed ka24e
no grinds nor smoke =)
1989 nissan 240sx
new clutch kit (stock)
new throw out bearing
new stater
new alternator
new spark plugs and wires
new battery
new fuel injectors
new timing chain and guide
new battery terminals
2 10" flex-lite fans
with a relay that controls them..
secondary butterfly were remove cuase this car is set for turbo (so it does idle)
aftermarket headers 3" exhaust all the way, (straight pipe)
lowered on some springs
no a/c or p/s
heater tho is good
p/w windows works =)
one motor mounts is bad passenger side
missing side view mirror
motor, new head mani and exhuast gasket
head straight out out from the machine shop i have the receipt
block has 76,000 miles on it, cylinder walls are perfect forgot to take a pick of it
motor has good compression runs good, just needs to get lubricated
this motor was built a week ago and i got it running yesterday 3/8/11
the reason i want to get rid of it is because i dont want to invest no more money into it... it needs a new oil pump and a new radiator cap, the valve arent getting lubricated meaning it needs a new pump. my camshaft craked in half and it was the same promblem but i dint my oil pump was bad, so i kept on driving it and clack! broken camshaft..
so i had to get a new one and its was put on the machine shop, this car with the new oil pump it would run perfect! i dont wana work on the car.. tired of it, so if anybody wants the 240 lmk
body is good, 8/10 barely any dents just has one on the lower driver side quarter panel, and it need a paint job
sunroof is good no leaks
interior is clean, just crack dash
with allt he money i put into it, this car has potential! i would stay with it but im tired of working on it..
would trade a honda and has to be 5 speed
located in orlandooooooooooooooooooooo
















if u want more pics just call or text me ok andres
also have a b18a1 for sale parted out long block for 250, needs flywheel but everything in the motor is good, head and block oh and its has 95,000 hard to believe huh? believe or not.. this motor was running just got parted out cause it was going to get built but never was worked on



wireharness included with mani u will need to buy new gaskets for the motor and probably new head studs (i would) $250 firm need money asap pm me
__________________

TIME AND MULAAAAA=) EQUALS PERFECTION!!!

TIME AND MULAAAAA=) EQUALS PERFECTION!!!
Last edited by bori_coqui1; Mar 9, 2011 at 02:58 PM.


