FS/WTT 1994 325i track car (for sr s13/s14)
Thread Starter
Registered User
Joined: Mar 2006
Posts: 34
Likes: 0
FS/WTT 1994 325i track car (for sr s13/s14)
I bought this car with the intentions of having it as a weekend fun/track car and to keep miles off my e46 m3, but i really miss playing around with nissans . Id be interested in trading it for a nicely set up s chassis. Im looking for something thats well put together and has the right supporting mods.
This car has been maintained and taken very good care of. I have a stack of paper work to prove it , made the drive down from north carolina 9 months ago.
Engine M50tu
Ucc underdrive pulleys
S50 cams
Turner Motorsports chip
Eurosport carbon cold air intake
Ebay headers+custom mid section
Rogue Engineering DMS cat back
Suspension
BC Racing br type coilovers 10k/12k(4 months old), Also include a set of bilsteins/h&r that are alot softer for autox
Racing Dynamics Sway bars
Solid RTAB bushings
M3 LCA bushings
New LCAs
Racing Dynamics Strut brace
VAC - Rear Sway Bar Reinforcement Kit
VAC - Rear Shock Mount Reinforcement kit
Remanufactured m3 3.0 rack
Driveline
F1 STAGE 3 CLUTCH KIT (m3 kit) less then 3k on it currently
F1 lightweight flywheel 16lbs
3.91 welded diff/reinforced mount
Adjustable clutch stop
Brakes
TMS slotted rotors
TMS Racing Brake Pads (carbon kevlar)
stainless lines
Body
house of kolor kandy teal, with a custom blue base. Car was painted about a month ago. Its really hard to capture the color with the sun going down. Car is getting a write up in juststance so ill try and get those picture up soon.
All new door handle covers and gaskets
M3 side moldings
Non amber tails/clear corners
Bavarian Auto Front lip
Fenders rolled and slight pull
E46 style grill
Wheels
8.5/9.5 chrome sawblades, comes with ds1 m3 wheels painted gloss white with pink pearl also
25mm H&R spacers
Nitto/federals
BBS lug bolts
Interior
Auto Power 6pt bolt in cage
G force harnesses
Corbeau Seats/brackets
Nrg quick realease
momo hub
nardi wheel
snakeskin roll bar padding covers/shift boot
The bad
Needs a alignment
Didnt have access to a balancer when i mounted the tires
Dash is a little cut up from cage install
NO AC
This car has been maintained and taken very good care of. I have a stack of paper work to prove it , made the drive down from north carolina 9 months ago.
Engine M50tu
Ucc underdrive pulleys
S50 cams
Turner Motorsports chip
Eurosport carbon cold air intake
Ebay headers+custom mid section
Rogue Engineering DMS cat back
Suspension
BC Racing br type coilovers 10k/12k(4 months old), Also include a set of bilsteins/h&r that are alot softer for autox
Racing Dynamics Sway bars
Solid RTAB bushings
M3 LCA bushings
New LCAs
Racing Dynamics Strut brace
VAC - Rear Sway Bar Reinforcement Kit
VAC - Rear Shock Mount Reinforcement kit
Remanufactured m3 3.0 rack
Driveline
F1 STAGE 3 CLUTCH KIT (m3 kit) less then 3k on it currently
F1 lightweight flywheel 16lbs
3.91 welded diff/reinforced mount
Adjustable clutch stop
Brakes
TMS slotted rotors
TMS Racing Brake Pads (carbon kevlar)
stainless lines
Body
house of kolor kandy teal, with a custom blue base. Car was painted about a month ago. Its really hard to capture the color with the sun going down. Car is getting a write up in juststance so ill try and get those picture up soon.
All new door handle covers and gaskets
M3 side moldings
Non amber tails/clear corners
Bavarian Auto Front lip
Fenders rolled and slight pull
E46 style grill
Wheels
8.5/9.5 chrome sawblades, comes with ds1 m3 wheels painted gloss white with pink pearl also
25mm H&R spacers
Nitto/federals
BBS lug bolts
Interior
Auto Power 6pt bolt in cage
G force harnesses
Corbeau Seats/brackets
Nrg quick realease
momo hub
nardi wheel
snakeskin roll bar padding covers/shift boot
The bad
Needs a alignment
Didnt have access to a balancer when i mounted the tires
Dash is a little cut up from cage install
NO AC
*
__________________
![Ls_[eg]hatch's Avatar](https://www.tamparacing.com/forums/customavatars/avatar37445_20.gif){kind=avatar}
