F/T 1990 Mazda 929 S
Thread Starter
Private Parts Thug Lyfe
Joined: Jun 2004
Posts: 5,604
Likes: 0
F/T 1990 Mazda 929 S
THIS CAR IS RWD!!!!!
ok so i need something more practical to get to school and work and wherever. car is a 1990 mazda 929 S with 113k miles. has some mods, and needs a little work but it's never left me stranded. recently replaced belts (all), spark plugs, oil, battery, iacv. it has a bride brix seat on a custom home depot rail but i have the stock drivers seat with rail, 340mm Nardi Torino steering wheel with fc rx7 hub, pioneer headunit with stock speakers and a 12in.
jbl and 1200watt amp, 17x8 +6 intercast mesh rims in the front and 18x9 +38 Work Rezax out back with an 8mm slip on spacer, jdm trust air filter, scroth 4 point harness, cut springs, has a rusted through exhaust but i have a good condition rear section i will give with the car. rolled and pulled fenders, the auto trans slips but i have a 5spd trans from a turbo rx7 that will bolt up with a mazda b3000 bellhousing and a ford probe turbo flywheel. um has pretty new hawk hps front brake pads with autozone rears and stainless steel braided brake lines all around. it's a good car to get into drifting with or w/e just needs a little tlc to be 100%. the cars are basically mazdas version of the cressida, aftermarket suspension, lsd's, and certain drivetrain and other parts can be used from the 86-92 rx7's. anyways i'm open to most offers let me know what you have
currently has different style mesh rims in the front but they are the same size as the previous ones.
ok so i need something more practical to get to school and work and wherever. car is a 1990 mazda 929 S with 113k miles. has some mods, and needs a little work but it's never left me stranded. recently replaced belts (all), spark plugs, oil, battery, iacv. it has a bride brix seat on a custom home depot rail but i have the stock drivers seat with rail, 340mm Nardi Torino steering wheel with fc rx7 hub, pioneer headunit with stock speakers and a 12in.
jbl and 1200watt amp, 17x8 +6 intercast mesh rims in the front and 18x9 +38 Work Rezax out back with an 8mm slip on spacer, jdm trust air filter, scroth 4 point harness, cut springs, has a rusted through exhaust but i have a good condition rear section i will give with the car. rolled and pulled fenders, the auto trans slips but i have a 5spd trans from a turbo rx7 that will bolt up with a mazda b3000 bellhousing and a ford probe turbo flywheel. um has pretty new hawk hps front brake pads with autozone rears and stainless steel braided brake lines all around. it's a good car to get into drifting with or w/e just needs a little tlc to be 100%. the cars are basically mazdas version of the cressida, aftermarket suspension, lsd's, and certain drivetrain and other parts can be used from the 86-92 rx7's. anyways i'm open to most offers let me know what you have
currently has different style mesh rims in the front but they are the same size as the previous ones.
__________________
Last edited by Silvia_San; Jan 17, 2008 at 02:33 PM.
