2002 Honda S2000 - low miles - lots of work
Thread Starter
TR Shop Mod
Joined: Apr 2001
Posts: 717
Likes: 0
2002 Honda S2000 - low miles - lots of work
Dropped the price to $20,500 - the OEM seats are back in the car.
I have been kicking around the idea of selling my car. I really want to purchase an NSX and would prefer to sell the car first so here we go. Lots of parts included. I think it is priced to sell considering the cost of the parts if bought new or used. All regualr maintnence was performed. There are no issues with the car. It is garaged and driven about twice per week. The car is super clean.
2002 Honda S2000 48,5xxx miles, No accidents, No issues. 2nd owner.
NADA clean retail $18,425 with this mileage
My asking price with all items listed below $22,000 considering the value of the parts listed below.
I still have all the OEM parts that will be included with the car (seats, wheels, exhaust etc..)
Not parting out at this time other than the extra sets of wheels listed below.
Interior
ARC Ti shift knob
Carbon center console
Buddy Club racing Spec seats with Buddy Club rails (will come with OEM red leather seats also).
Safety 21 (Cusco’s steel version) 4 point cage with harness bar - black
Exterior
J’s Racing front half lip
AJR side diffusers
Clear headlamps
Clear side markers
Ztec Single exhaust cap
OEM AP1 rear spoiler/wing
Suspension
Tein Flex coilovers
Spoon Strut Tower Bar
Spoon Engine Torque Damper
Beatrush Rear Performance Bar
Engine
Spoon Kevlar intake duct/snorkel
Spoon oil filler cap
Spoon radiator cap
Spoon magnetic drain plugs
Spoon reservoir covers
APR carbon radiator cooling panel cut to fit Spoon snorkel
Invidia test pipe
Spugen single exhaust with Ti tip
Wheels
Take your pick (one set) - can reduce the price if you want just the OEM wheels
Right now mounted on 18” Volk RE30 Mercury silver (18x7.5 front 18x8.5 rear)
Also have the forged white Buddy Club QF’s non-stagger 17x9 all around (as pictured)
Also have un-mounted (no tires) Work Meister 2pc in gloss black 17x8 17x9 fitment
5Zigen Pro-Racer lugs included
Most recent pics:
I will get some new pics with the RE30's shortly.
Any questions, post or PM or email. vvs@tampabay.rr.com
I am located in the Tampa, FL. area.
James
Most recent pics:
I have been kicking around the idea of selling my car. I really want to purchase an NSX and would prefer to sell the car first so here we go. Lots of parts included. I think it is priced to sell considering the cost of the parts if bought new or used. All regualr maintnence was performed. There are no issues with the car. It is garaged and driven about twice per week. The car is super clean.
2002 Honda S2000 48,5xxx miles, No accidents, No issues. 2nd owner.
NADA clean retail $18,425 with this mileage
My asking price with all items listed below $22,000 considering the value of the parts listed below.
I still have all the OEM parts that will be included with the car (seats, wheels, exhaust etc..)
Not parting out at this time other than the extra sets of wheels listed below.
Interior
ARC Ti shift knob
Carbon center console
Buddy Club racing Spec seats with Buddy Club rails (will come with OEM red leather seats also).
Safety 21 (Cusco’s steel version) 4 point cage with harness bar - black
Exterior
J’s Racing front half lip
AJR side diffusers
Clear headlamps
Clear side markers
Ztec Single exhaust cap
OEM AP1 rear spoiler/wing
Suspension
Tein Flex coilovers
Spoon Strut Tower Bar
Spoon Engine Torque Damper
Beatrush Rear Performance Bar
Engine
Spoon Kevlar intake duct/snorkel
Spoon oil filler cap
Spoon radiator cap
Spoon magnetic drain plugs
Spoon reservoir covers
APR carbon radiator cooling panel cut to fit Spoon snorkel
Invidia test pipe
Spugen single exhaust with Ti tip
Wheels
Take your pick (one set) - can reduce the price if you want just the OEM wheels
Right now mounted on 18” Volk RE30 Mercury silver (18x7.5 front 18x8.5 rear)
Also have the forged white Buddy Club QF’s non-stagger 17x9 all around (as pictured)
Also have un-mounted (no tires) Work Meister 2pc in gloss black 17x8 17x9 fitment
5Zigen Pro-Racer lugs included
Most recent pics:
I will get some new pics with the RE30's shortly.
Any questions, post or PM or email. vvs@tampabay.rr.com
I am located in the Tampa, FL. area.
James
Most recent pics:
Last edited by JJFreshyZC; Feb 18, 2008 at 04:04 PM.
cause the whistle goes...
Joined: Jul 2003
Posts: 3,741
Likes: 0
bump for a super clean s. lmk if u decide to part it out, i'd like to buy a few things. and did u sell the little carbon fiber mirrors?
__________________
R.I.P. Brian Nichols 02/07/1989-11/23/2008
R.I.P. Brian Nichols 02/07/1989-11/23/2008
Registered User
Joined: May 2006
Posts: 464
Likes: 0
very nice, one of the cleanest ive seen, Not too much crap on it.
__________________
All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. (1925 IBM Maintenence Manual)
All parts should go together without forcing. You must remember that the parts you are reassembling were disassembled by you. Therefore, if you can't get them together again, there must be a reason. By all means, do not use a hammer. (1925 IBM Maintenence Manual)
