89 Fox coupe FS
i have 89 coupe with a 302 /5speed combo.Car was a four cylinder /auto with a bought it two years ago.Did a V8 conversion with a 89 efi harness and computer.here is the mod list
1998 Exploer V8 motor 32,000 miles on engine when i bought it
ported and polished E7 cylinder heads,crane springs and retainers
1,7 roller rockers
Eldbrock performer efi intake(ported and polished)
75mm mass air meter
70mm throttle body and spacer
Ford Motor sports Ecam .498/.498 lift
1 5/8 headers mac
offroad pipe 2 1/2
mac produmps 2 1/2
3.73 rear diff gear 8.8 axle
coilovers up front with 175 springs,70/30 lake wood drag shocks
ford motor sports caster camber plates
rear shocks are koni adjustable
has subframe conecters weld on.manual steering rack
v8 front brake swapped on to car.
upper and lower rear control arms from Steeda
100 shot compucar nos kit dry
3inch cowl hood bolt on.
King cobra clutch and B/M short throw shifter
has atou meter tach and air/fuel ratio gauge.2 5/8 water and oil pressure gauge mounted in middle a/c duct
car has all black interior most of oem black and a couple peices are dyed black.black front seats out of a 96 mustang.has cold a/c.horn does not work,but a easy fix.
car is sitting on weld drag lites 15/3.5 front and 15/9 in rear.new tires 165r 15 and 275 60 15.car is flat black waiting for a new paint job.had car on dyno made 280 wheels on motor with 305 ft pounds of torque on spray it made 380 and a 460 ft pounds of torque.car drive great and is very fast asking $5000. obo
with the old motor with ported stock heads and gt40 intake,stock cam and every thing else you see above i ran a 8.1 1/8th with a 1.8 60' on street tires all motor.car hooks good.i have been out on the street with the car,so some of you may have seen it around tampa.i drive this car to work day on 93 octane.very reliable.

1998 Exploer V8 motor 32,000 miles on engine when i bought it
ported and polished E7 cylinder heads,crane springs and retainers
1,7 roller rockers
Eldbrock performer efi intake(ported and polished)
75mm mass air meter
70mm throttle body and spacer
Ford Motor sports Ecam .498/.498 lift
1 5/8 headers mac
offroad pipe 2 1/2
mac produmps 2 1/2
3.73 rear diff gear 8.8 axle
coilovers up front with 175 springs,70/30 lake wood drag shocks
ford motor sports caster camber plates
rear shocks are koni adjustable
has subframe conecters weld on.manual steering rack
v8 front brake swapped on to car.
upper and lower rear control arms from Steeda
100 shot compucar nos kit dry
3inch cowl hood bolt on.
King cobra clutch and B/M short throw shifter
has atou meter tach and air/fuel ratio gauge.2 5/8 water and oil pressure gauge mounted in middle a/c duct
car has all black interior most of oem black and a couple peices are dyed black.black front seats out of a 96 mustang.has cold a/c.horn does not work,but a easy fix.
car is sitting on weld drag lites 15/3.5 front and 15/9 in rear.new tires 165r 15 and 275 60 15.car is flat black waiting for a new paint job.had car on dyno made 280 wheels on motor with 305 ft pounds of torque on spray it made 380 and a 460 ft pounds of torque.car drive great and is very fast asking $5000. obo
with the old motor with ported stock heads and gt40 intake,stock cam and every thing else you see above i ran a 8.1 1/8th with a 1.8 60' on street tires all motor.car hooks good.i have been out on the street with the car,so some of you may have seen it around tampa.i drive this car to work day on 93 octane.very reliable.

Last edited by harold harper; Aug 30, 2007 at 09:30 PM.
man i love this car .... seen it and help build it ...bad ass car fast driven it many times.......harold i might have a buyer for my infiniti if it sells ill buy this off you
u forgot to mention rear battery conversion and ice cold ac , power windows , 96 seats front and rear covered to match
u forgot to mention rear battery conversion and ice cold ac , power windows , 96 seats front and rear covered to match




