98 YZF and 92 FZR both/ $2000
Thread Starter
eats babies
Joined: Jun 2005
Posts: 2,755
Likes: 0
98 YZF and 92 FZR both/ $2000
The FZR has a clean and clear title, I have driven it for the last 1 1/2 years. It has a powdercoated frame, triples, forks, and Vance and Hines Side covers. Custom Black paint with custom decals (repsol orange). Rims are paint Repsol orange aswell. The bike is 22inches wide at its widest point. It has 19,200 miles on it. All the electronics are upgraded to 96' spec including the VR and CDI. Carbs have a stage 3 FactoryPro kit, carbs were cleaned tuned and synce at Nokomis Yamaha 4,000 miles ago. Valves were set back to spec 4,000 miles ago aswell. The shift forks, shift fork shafts, shift shaft, clutch discs, clutch plates, pressure springs, detent arm/spring all were rplaced at 13,000 miles with new OEM parts.
Has a full V&H header with two brothers bolt-on. K&N pod filters, -1 +1 sprocket kit. New 530 Gold RK chain. Bike runs perfect and shifts flawless. Next is the 98' YZF600R, it has no title (salvage) and cannot be street legal. Complete bike minus a few small odds and end parts, (pegs, signals, small inside trim peices. The fully adjustable front end bolts onto the FZR, 90hp engine bolts into the FZR aswell (running, spare engine with more HP then the modded FZR engine). Swingarm would need to be trimmed down to 8.490" at the pivot point to bolt onto the FZR (run a 180). Around here there is only mile long straight aways so I cannot use the handling aspect of the bike too much hence the sale. I am looking at a mint 00' zx9 so am looking for a quick sale.
Comes with two aftermarket slip on pipes, (two brothers and SS2R). I am Looking to get $2,000 for both. I do not want to part out or seperate them.
941 763 9462
Lots more parts included, perfect front fairing.
Has a full V&H header with two brothers bolt-on. K&N pod filters, -1 +1 sprocket kit. New 530 Gold RK chain. Bike runs perfect and shifts flawless. Next is the 98' YZF600R, it has no title (salvage) and cannot be street legal. Complete bike minus a few small odds and end parts, (pegs, signals, small inside trim peices. The fully adjustable front end bolts onto the FZR, 90hp engine bolts into the FZR aswell (running, spare engine with more HP then the modded FZR engine). Swingarm would need to be trimmed down to 8.490" at the pivot point to bolt onto the FZR (run a 180). Around here there is only mile long straight aways so I cannot use the handling aspect of the bike too much hence the sale. I am looking at a mint 00' zx9 so am looking for a quick sale.
Comes with two aftermarket slip on pipes, (two brothers and SS2R). I am Looking to get $2,000 for both. I do not want to part out or seperate them.
941 763 9462
Lots more parts included, perfect front fairing.
