F/S 1990 eagle talon TSi
Thread Starter
Registered User
Joined: Apr 2006
Posts: 306
Likes: 0
F/S 1990 eagle talon TSi
1990 eagle talon fwd tsi.
2000 obo will trade for a sportbike
it has:
gotti etoile 455 3 piece aluminum racing wheels
brand new plugs/wires
brand new throttle body with good sensors
brand new battery
new alternator
new water pump
fresh vacuum lines all around
emissions removed
cruise control removed
new shifter knob
new shifter bushings
home made boost controller at 15 psi
OR run line from j pipe to wastegate actuator for 7 psi
ORRR i could finish the dual stage setup i was working on and have you run 7 psi low and 15 psi high boost
autometer boost/vac gauge
cleaned up stock intercooler with fins straightened and repaired
boosts fine smokes a little (prolly due to bad ecu)
CAN INCLUDE:
stock black wheels off an esi talon without tires (just in case?)
all the stock stuff i toock out (everything from emissions and cruise control etc.)
HAYNES shop manual for the car (essential if you do work yourself)
it needs:
throwout bearing (may as well replace the clutch while you are at it)...
ecu (75(plain)-250(eprom) from dsmtuners.com) runs ok just has a poor idle due to leaky capacitors.
PICS:
ASKING:
2500 obo (REASONABLE OFFERS WILL MORE THAN LIKELY BE ACCEPTED)
I compression tested this when I got it and it read PERFECT in the middle of spec.
all this needs is an ecu (go with the EPROM so you can run a dsmlink when you start modding it). and you will have a fine running machine. I've just decided to focus on my tiburon more than anything plus i cant really afford insurance on two cars. pm me if you are interested...
2000 obo will trade for a sportbike
it has:
gotti etoile 455 3 piece aluminum racing wheels
brand new plugs/wires
brand new throttle body with good sensors
brand new battery
new alternator
new water pump
fresh vacuum lines all around
emissions removed
cruise control removed
new shifter knob
new shifter bushings
home made boost controller at 15 psi
OR run line from j pipe to wastegate actuator for 7 psi
ORRR i could finish the dual stage setup i was working on and have you run 7 psi low and 15 psi high boost
autometer boost/vac gauge
cleaned up stock intercooler with fins straightened and repaired
boosts fine smokes a little (prolly due to bad ecu)
CAN INCLUDE:
stock black wheels off an esi talon without tires (just in case?)
all the stock stuff i toock out (everything from emissions and cruise control etc.)
HAYNES shop manual for the car (essential if you do work yourself)
it needs:
throwout bearing (may as well replace the clutch while you are at it)...
ecu (75(plain)-250(eprom) from dsmtuners.com) runs ok just has a poor idle due to leaky capacitors.
PICS:
ASKING:
2500 obo (REASONABLE OFFERS WILL MORE THAN LIKELY BE ACCEPTED)
I compression tested this when I got it and it read PERFECT in the middle of spec.
all this needs is an ecu (go with the EPROM so you can run a dsmlink when you start modding it). and you will have a fine running machine. I've just decided to focus on my tiburon more than anything plus i cant really afford insurance on two cars. pm me if you are interested...
__________________
(}) zoom zoom...brap brap (})
(}) zoom zoom...brap brap (})
Last edited by 6speedwonder; Mar 29, 2007 at 04:29 AM.
Registered User
Joined: May 2004
Posts: 789
Likes: 0
LMK if you might be interested
https://www.tamparacing.com/forums/c...erbird-sc.html
https://www.tamparacing.com/forums/c...erbird-sc.html
__________________
Just another day in paradise...living the dream!!!
Just another day in paradise...living the dream!!!
Registered User
Joined: Jan 2007
Posts: 155
Likes: 0
good luck. glad to see you focus on the tib... hit up my site, dont forget i can make you one off parts for it
Hyundai Upgrades, Auto Repair, Brake Services. Tampa, FL.
Hyundai Upgrades, Auto Repair, Brake Services. Tampa, FL.
