FS: 91 Super Red II turbo, targa, 5sp, loaded, $5000 solid. LQQK!
Thread Starter
Elitist Supra Asshole :)
Joined: Jun 2003
Posts: 2,598
Likes: 0
FS: 91 Super Red II turbo, targa, 5sp, loaded, $5000 solid. LQQK!
Well, its come time to put my first supra up on the barrel head. ive had this car since the beginning of 2003. it was bought at a police auction and i picked it up w/ a BHG, power steering leak, torn leather front seats, and Shot paint.
this was going to be the platform for my T88H/N20/Stroker 7MGTE. unfortunately, i deemd a targa top, liftback too weak of a chassis for my goals for a Street car w/o cage. im going to order a Z20 soarer for my big project. so, i have no use for this car. the car was down for over a year as my plans kept changing. since i decided to build a soarer, i have put this car back to stock. I am including a few mods which will offset the price reduction for the torn front seats.
the entire interior is in great shape EXCEPT for the front seat covers. they are shot. i was quoted $460 for new front seat leathers from toyota, the entire kit. so i will automatically deduct $500 from what a Pristene 1991 Turbo books for: $6000.
this car is mechanically sound and ready to be modded. if you are looking for a clean MK3 with fresh motor and ready for mods, THIS IS IT!
I completely rebuilt the 7MGTE and have all the reciepts for your records. a few of the goodies included in the car are:
Cryotreated 0.5mm oversized pistons
PlasmaMoly rings
New wrist pins and clips
Shotpeened stock rods
Micropolished 7M crank
Clevite 77 main, rod and thrust bearings
Oil pump mods as seen here;Mods
All new seals and gaskets
HKS 2.0 Stopper Metal headgasket
ARP head studs torqued to 105 lb/ft with moly lube
Reconditioned head with valves reground and lapped, new valve stem seals.
All vaccum lines replaced w/ High Temp Silicone and zip ties
Throttle body and ISC coolant lines bypassed
SOGI short shifter mod
New shifter bushings
Clutch Net 3-puck Feramic sprung hub clutch
new Pilot bearing and Throwout bearing
Walbro 255HP with custom 4awg wiring
J-tube restriction eliminated
fuel pump relay and resistor pack eliminated
EVERY thing on this car works as it should, just as it rolled off the factory floor...except the AC. i had to purge it when i did the motor rebuild. that needs to be taken to a professional to pull a vaccum and recharged. i dont have the resources to do that myself.
the Paint is Freshly high-speed polished w/ 3M compound and waxed for protection. the side moldings are repainted with factory Super Red II paint.
i will post up pics as soon as i can.
PM me, email me at flubyux2@yahoo.com or call me at 727.744.5785.
NEED IT SOLD ASAP, im moving!
this was going to be the platform for my T88H/N20/Stroker 7MGTE. unfortunately, i deemd a targa top, liftback too weak of a chassis for my goals for a Street car w/o cage. im going to order a Z20 soarer for my big project. so, i have no use for this car. the car was down for over a year as my plans kept changing. since i decided to build a soarer, i have put this car back to stock. I am including a few mods which will offset the price reduction for the torn front seats.
the entire interior is in great shape EXCEPT for the front seat covers. they are shot. i was quoted $460 for new front seat leathers from toyota, the entire kit. so i will automatically deduct $500 from what a Pristene 1991 Turbo books for: $6000.
this car is mechanically sound and ready to be modded. if you are looking for a clean MK3 with fresh motor and ready for mods, THIS IS IT!
I completely rebuilt the 7MGTE and have all the reciepts for your records. a few of the goodies included in the car are:
Cryotreated 0.5mm oversized pistons
PlasmaMoly rings
New wrist pins and clips
Shotpeened stock rods
Micropolished 7M crank
Clevite 77 main, rod and thrust bearings
Oil pump mods as seen here;Mods
All new seals and gaskets
HKS 2.0 Stopper Metal headgasket
ARP head studs torqued to 105 lb/ft with moly lube
Reconditioned head with valves reground and lapped, new valve stem seals.
All vaccum lines replaced w/ High Temp Silicone and zip ties
Throttle body and ISC coolant lines bypassed
SOGI short shifter mod
New shifter bushings
Clutch Net 3-puck Feramic sprung hub clutch
new Pilot bearing and Throwout bearing
Walbro 255HP with custom 4awg wiring
J-tube restriction eliminated
fuel pump relay and resistor pack eliminated
EVERY thing on this car works as it should, just as it rolled off the factory floor...except the AC. i had to purge it when i did the motor rebuild. that needs to be taken to a professional to pull a vaccum and recharged. i dont have the resources to do that myself.
the Paint is Freshly high-speed polished w/ 3M compound and waxed for protection. the side moldings are repainted with factory Super Red II paint.
i will post up pics as soon as i can.
PM me, email me at flubyux2@yahoo.com or call me at 727.744.5785.
NEED IT SOLD ASAP, im moving!
__________________
Last edited by flubyux2; Mar 30, 2005 at 01:09 PM.
could be worse
Joined: Feb 2004
Posts: 11,421
Likes: 0
Thread Starter
Elitist Supra Asshole :)
Joined: Jun 2003
Posts: 2,598
Likes: 0
thanks guys. yeah, i would recover the seats, but i dont really have the resources to do so right now... so im just asking for a lower price to offset the cost of fixing the seats.
__________________
