FS: '92 CX w/B20 - 218 Hp and 153 lbs-ft (less than 1000 miles on motor)
1992 Phantom Grey Honda Civic CX
112k miles on body
Less than 1000 miles on motor
After completing this car I have found that I have no time to drive it. I did a proper break-in on the engine and took it to the dyno @ approximately 900 miles.
The body is straight and has never been in an accident. The paint is not perfect but is in relatively good shape. I have removed the sound deadening material from the driver and passenger foot wells.
I used all brand new OEM Honda bolts on many of the parts in the engine (e.g. tranny bolts, all intake manifold nuts/bolts, tranny/block brace bolts, etc.).A
At its current weight ( ~2000 lbs.), slicks and a good driver will easily put this car well into the 12’s in the ¼ mile.
$7500 OBO
Please email me at kenji211@tampabay.rr.com if you are interested.
Engine
218 Hp and 153 lbs-ft torque (w/o programmable engine management). More power can be found using Hondata, Uberdata, etc.
B20B4 block
84.5mm 12.5:1 CR Rollerwave pistons
Eagle rods
ITR main cap girdle
Toda flywheel 9 lbs.
Toda header
Toda spec A cams
Toda adjustable cam gears
Portflow B16 head
Portflow titanium retainers
Portflow inner intake and exhaust valve springs
ITR outer intake and exhaust valve springs
ITR intake valves
64mm ITR throttle body
ITR intake manifold
270cc RC injectors
AEM ITR cold air intake
B&M adjustable FPR
5Zigen Border 304 speed exhaust (Japan only)
Chipped P28 ECU
JDM ITR aluminum AC bracket
ITR block/tranny brace (one piece)
Polyurethane motor mounts
Transmission
USDM ITR transmission (bought brand new from Acura)
JDM ITR 4.795 final drive
Suspension
Mugen Lowdown coilovers for ITR (5-way damping adjustable)
ITR rear lower control arms
ITR front control arms
Body
Si/VX front lip (brand new from Honda)
Vision amber corners
Interior
JDM SiRII gauge cluster (whiteface)
Changed interior to black from a Civic Si








-kenji
112k miles on body
Less than 1000 miles on motor
After completing this car I have found that I have no time to drive it. I did a proper break-in on the engine and took it to the dyno @ approximately 900 miles.
The body is straight and has never been in an accident. The paint is not perfect but is in relatively good shape. I have removed the sound deadening material from the driver and passenger foot wells.
I used all brand new OEM Honda bolts on many of the parts in the engine (e.g. tranny bolts, all intake manifold nuts/bolts, tranny/block brace bolts, etc.).A
At its current weight ( ~2000 lbs.), slicks and a good driver will easily put this car well into the 12’s in the ¼ mile.
$7500 OBO
Please email me at kenji211@tampabay.rr.com if you are interested.
Engine
218 Hp and 153 lbs-ft torque (w/o programmable engine management). More power can be found using Hondata, Uberdata, etc.
B20B4 block
84.5mm 12.5:1 CR Rollerwave pistons
Eagle rods
ITR main cap girdle
Toda flywheel 9 lbs.
Toda header
Toda spec A cams
Toda adjustable cam gears
Portflow B16 head
Portflow titanium retainers
Portflow inner intake and exhaust valve springs
ITR outer intake and exhaust valve springs
ITR intake valves
64mm ITR throttle body
ITR intake manifold
270cc RC injectors
AEM ITR cold air intake
B&M adjustable FPR
5Zigen Border 304 speed exhaust (Japan only)
Chipped P28 ECU
JDM ITR aluminum AC bracket
ITR block/tranny brace (one piece)
Polyurethane motor mounts
Transmission
USDM ITR transmission (bought brand new from Acura)
JDM ITR 4.795 final drive
Suspension
Mugen Lowdown coilovers for ITR (5-way damping adjustable)
ITR rear lower control arms
ITR front control arms
Body
Si/VX front lip (brand new from Honda)
Vision amber corners
Interior
JDM SiRII gauge cluster (whiteface)
Changed interior to black from a Civic Si








-kenji
Last edited by kenji; Aug 15, 2004 at 12:48 PM.
bump for being an old school badass
__________________
http://www.floridaracing.org

Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
http://www.floridaracing.org

Editor - Stangtv.com - Dragzine.com
2011 Mustang GT Premium 6-speed manual Sterling Gray Metallic - New Project Car
SCT SF3 - FRPP Adjustable Handling Pack - Vortech 597 RWHP 476 lb/ft - 7.5 PSI
1965 Mustang - Blow thru Dart SBF 427ci with a Paxton NOVI-2500
Hydraulic roller, 91 octane, 1030HP
will you trade it for a 1997 gmc jimmy slt
it is 2 wheel drive
it is lowered on blocks and springs but the stock suspension comes with it.
it has 130k with oil changed religioulsly every 2500 miles.
it is white with leather tan interior.
it is an extremely clean truck.
4 new tires on it.
it has a system included with it .....2 memphis 10 in subs and an 760 watt amp. it has a cd player. i also have the stock radio with it.it has duel exhaust and a k&n intake. i have all stock parts for it also. -matt
it is 2 wheel drive
it is lowered on blocks and springs but the stock suspension comes with it.
it has 130k with oil changed religioulsly every 2500 miles.
it is white with leather tan interior.
it is an extremely clean truck.
4 new tires on it.
it has a system included with it .....2 memphis 10 in subs and an 760 watt amp. it has a cd player. i also have the stock radio with it.it has duel exhaust and a k&n intake. i have all stock parts for it also. -matt
__________________
You can find me at the Track!
KJ built
ALPHA TUNED
Induction Performance 727.505.1423
* Engine Management Tuning, Track Setup, Consultation, Turbo Sales, Parts Sales (WorldWide)
^^^
ONLY SHOP IN TAMPA THAT TREATS YOUR CAR AS THEIR OWN
You can find me at the Track!
KJ built
ALPHA TUNED
Induction Performance 727.505.1423
* Engine Management Tuning, Track Setup, Consultation, Turbo Sales, Parts Sales (WorldWide)
^^^
ONLY SHOP IN TAMPA THAT TREATS YOUR CAR AS THEIR OWN
haha you try to get olds and mcree to sell you their white vxs, you finally get one and then paint it gunmetal. surprised to see this one go seein how long it took you to put everything together. best of luck
__________________
HMMMM.... Whats more fun??? Smoking a quarter in a car or smoking a car in the 1/4???
HMMMM.... Whats more fun??? Smoking a quarter in a car or smoking a car in the 1/4???


