1992 Civic Hatch B16 Project for sale (extras!)
Here is what I have....Please read this COMPLETE post.
1992 Honda Civic Dx Hatch
170,xxx miles on Chassis
Teal Green
GS-R Front Disk Brakes (New Rotors, New Lower Ball Joint, New Calipers, and Pads)
Drum Rear Brakes
17" Racing Hart C2 Evo's (one-piece) with decent tires.
NO A/C (but components included below)
There CURRENTLY in no MOTOR in this car!
Stuffs in the garage that come with the car:
NEW OEM Front bumper (unpainted, still in plastic from honda)
NEW OEM Rear bumper (unpainted, still in plastic from honda)
B16 Swap with 99 GS-R hydro Tranny (and p-28 ecu). Note: Motor currently has head removed. I have NEW OEM rings for the pistons, and a complete NEW OEM upper and lower gasket set.
NEW OEM door moldings (the black molding by the window)
NEW OEM front windsheild molding
Complete A/c system for Civic
1997 Acura Integra ITR Dash with Blown airbag (no center console, no gauge cluster, but has complete underdash harness and ducting (will fit in 92 hatch with minor modifications)
1994 Acura Integra Fabtic seats Front and Rear (grey).
And probably a few other small items.
This complete "clean out my garage" package is only valid for about 1 week or so (about Feb 3).
Price: $4k
Now to answer your questions:
I like this hatch. I bought it to build it, and around the same time, my wife had our son. I wish I had the time to finish it, but I don't. If the car is not purchased in the next week, I'll be taking it to a friends shop to have it assembled, and the price will go up.
The price isNOT negotiable. I do not want to trade. PERIOD. If you are interested, please contact me. I feel this is a good price considering all the stuff it comes with. Bumpers (OEM) cost about $400, window moldings are about $250), the B16 swap is about $2k. The brakes are BRAND NEW (no miles....in fact, the caliper are not even on yet!)
WARNING: This is a project car. Some assembly required. This car comes with extra parts too. If you don't know what your doing, than this car is not for you!
1992 Honda Civic Dx Hatch
170,xxx miles on Chassis
Teal Green
GS-R Front Disk Brakes (New Rotors, New Lower Ball Joint, New Calipers, and Pads)
Drum Rear Brakes
17" Racing Hart C2 Evo's (one-piece) with decent tires.
NO A/C (but components included below)
There CURRENTLY in no MOTOR in this car!
Stuffs in the garage that come with the car:
NEW OEM Front bumper (unpainted, still in plastic from honda)
NEW OEM Rear bumper (unpainted, still in plastic from honda)
B16 Swap with 99 GS-R hydro Tranny (and p-28 ecu). Note: Motor currently has head removed. I have NEW OEM rings for the pistons, and a complete NEW OEM upper and lower gasket set.
NEW OEM door moldings (the black molding by the window)
NEW OEM front windsheild molding
Complete A/c system for Civic
1997 Acura Integra ITR Dash with Blown airbag (no center console, no gauge cluster, but has complete underdash harness and ducting (will fit in 92 hatch with minor modifications)
1994 Acura Integra Fabtic seats Front and Rear (grey).
And probably a few other small items.
This complete "clean out my garage" package is only valid for about 1 week or so (about Feb 3).
Price: $4k
Now to answer your questions:
I like this hatch. I bought it to build it, and around the same time, my wife had our son. I wish I had the time to finish it, but I don't. If the car is not purchased in the next week, I'll be taking it to a friends shop to have it assembled, and the price will go up.
The price isNOT negotiable. I do not want to trade. PERIOD. If you are interested, please contact me. I feel this is a good price considering all the stuff it comes with. Bumpers (OEM) cost about $400, window moldings are about $250), the B16 swap is about $2k. The brakes are BRAND NEW (no miles....in fact, the caliper are not even on yet!)
WARNING: This is a project car. Some assembly required. This car comes with extra parts too. If you don't know what your doing, than this car is not for you!
__________________

1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com

1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com
Last edited by RiceRocket; Jan 27, 2004 at 07:00 AM.
In preparation for the Civic11s reply:
Sorry...couldn't help myself. Damn nice project car, I'm sure you will get every bit you are asking for it.
So...want to trade? Looks nice...can I come over for a test drive? I have $10 cash and a coupon for a free Biggie drink and fries. Let me know.
Sorry...couldn't help myself. Damn nice project car, I'm sure you will get every bit you are asking for it.
__________________
Last edited by Alan; Jan 27, 2004 at 07:03 AM.
ttt
__________________

1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com

1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com
TTT
__________________

1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com

1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com
Does it have fitting door panels?
__________________
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
727-510-6301
Honda Valve Adjustments 50$
I buy and/or Fix Broken Honda transmissions.
I TUNE KPRO AND S300
I DO NOT WORK FOR FREE
E-Z OUT BOLT AND STUD EXTRACTOR: A tool ten times harder than any known drill bit that snaps neatly off in bolt holes thereby ending any possible future use.
Originally posted by integra
Does it have fitting door panels?
Does it have fitting door panels?
Charles
__________________

1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com

1953 Cadillac Coupe De Ville (Fuel Injected, Drive-by-wire, DoD)
2009 Pontiac G8 GT (6.0l V8 Sleeper)
2011 Toyota Sequoia Sport 4x4 (Tow Rig)
My Blog: www.HotRodCaddy.com
im assuming you have the lights and all, and the car pretty much just needs to be assembled to have the basic electronics and engine running, correct?
Can you PM me/post additional pictures?
Can you PM me/post additional pictures?
__________________
Originally Posted by Lil Ze
Florida is the new Miami through and through.


