2 12" RE MX subs CHEAP!
Registered User
Thread Starter
Join Date: Jan 2009
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
2 12" RE MX subs CHEAP!
Ok, I've got 2 12" RE MX 2 ohm DVC. These subs are brand new, just have sat in a display board of one of my friends shops. They have never seen any power ran to them at all yet so they still are tight and have to get broken in...
Now these things can sell like $600-$800 for 1, but im asking for $600 for both of them. I wont take any trades, but PM for any reasonable offers and i'll try and work with you. Contact me at stphn_attaway@yahoo.com or 727-366-5094
Now these things can sell like $600-$800 for 1, but im asking for $600 for both of them. I wont take any trades, but PM for any reasonable offers and i'll try and work with you. Contact me at stphn_attaway@yahoo.com or 727-366-5094
technician ...
Join Date: May 2006
Posts: 1,595
Likes: 0
Received 0 Likes
on
0 Posts
I thought you were using these in your install??? and if not why???
__________________
Originally Posted by George Orwell 1984
Its presupposed that somewhere or other, outside oneself, there was a "real" world where "real" things happened. But how could there be such a world? What knowledge have we of anything, save through our own mind? All happenings are in the mind. What ever happens in all minds, truly happens.
Originally Posted by Funk
Your mind contains the whole universe, the key is being able to see past yourself, this world, and thought itself.
Registered User
Join Date: Jan 2009
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
hey these are actually my subs, i accidentally posted this on his name...
but specs are:
Electrical Q Value -Qes: 0.503
Mechanical Q Value -Qms: 3.206
Total Speaker Q Value -Qts: 0.434
Free Air Resonance -Fs: 23.165 Hz
Equivalent Compliance -Vas: 59.0 liters
One-Way, Linear Excursion -Xmax: 22 mm
Efficiency -SPL 1W/1m: 83.5 dB SPL
Effective Piston Area -Sd: 480 cm^2
DC Resistance -Re: 1.4 ohm
Nominal Impedance -Znom: Dual 1/2 ohm
Thermal Power Handling -Pe: 1500 W
Force Factor -Bl: 14.56
Mounting Depth - 10.25"
Mounting Hole Diameter - 11.5"
Overall Diameter - 13"
Bolt Hole Circle - 12.25"
Motor Width - 8.5"
Motor Depth - 2.5"
Basket Depth - 7.75"
Displacement - 0.19 cu. ft.
Weight - 33 lbs
That's pretty much every single thing straight from reaudio.com... but i decided to go with some Ascendant audio chaos' because these things are 1500 rms each, i dont have the money, or the electrical system to handle an amp for them...
but specs are:
Electrical Q Value -Qes: 0.503
Mechanical Q Value -Qms: 3.206
Total Speaker Q Value -Qts: 0.434
Free Air Resonance -Fs: 23.165 Hz
Equivalent Compliance -Vas: 59.0 liters
One-Way, Linear Excursion -Xmax: 22 mm
Efficiency -SPL 1W/1m: 83.5 dB SPL
Effective Piston Area -Sd: 480 cm^2
DC Resistance -Re: 1.4 ohm
Nominal Impedance -Znom: Dual 1/2 ohm
Thermal Power Handling -Pe: 1500 W
Force Factor -Bl: 14.56
Mounting Depth - 10.25"
Mounting Hole Diameter - 11.5"
Overall Diameter - 13"
Bolt Hole Circle - 12.25"
Motor Width - 8.5"
Motor Depth - 2.5"
Basket Depth - 7.75"
Displacement - 0.19 cu. ft.
Weight - 33 lbs
That's pretty much every single thing straight from reaudio.com... but i decided to go with some Ascendant audio chaos' because these things are 1500 rms each, i dont have the money, or the electrical system to handle an amp for them...
Registered User
Join Date: Jun 2006
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
Good deal, I would prob scoop these if I was still into audio alot.
__________________
Need anything installed or built? PM me.
MECP Certified.
Alarm: Viper 5200
HU: Stock
Active Set-Up
Tweets: Image Dyamics CD1pro mini horns
Mids: Sundown Neo Pro 8s
Amp: Kicker IX500.4 (2)
Sub Stage
Subs: (2) Dayton Audio 15" HF
Amp: Kicker IX1000.1
Need anything installed or built? PM me.
MECP Certified.
Alarm: Viper 5200
HU: Stock
Active Set-Up
Tweets: Image Dyamics CD1pro mini horns
Mids: Sundown Neo Pro 8s
Amp: Kicker IX500.4 (2)
Sub Stage
Subs: (2) Dayton Audio 15" HF
Amp: Kicker IX1000.1
