What are you using for a Taglight
Thread Starter
Sideways Maffia
Joined: Sep 2003
Posts: 2,727
Likes: 0
What are you using for a Taglight
Ok so i bought my 2nd 636 and thought i'd get the taillight integrator kit...so basically i paid $49.99 for this little circuit board with a bunch of wires comming out of it. If you're not familiar with that, it basically makes half the taillight flash when you have a blinker on...a type of fender eliminator, anyways, that didn't work right because the taillights on the 06 636 are one circuit board and all the led's are either on/off...not half and half...
ANYWAYS... now i ghetto rigged a bracket for my temp tag (still havent gotten the metal one in) and im trying to figure out what to do for a light...i put this little 12v led down there, and it shorted right away. just looking for some ideas.
ANYWAYS... now i ghetto rigged a bracket for my temp tag (still havent gotten the metal one in) and im trying to figure out what to do for a light...i put this little 12v led down there, and it shorted right away. just looking for some ideas.
__________________
NOBAMA!
NOBAMA!
gone fishin
Joined: May 2004
Posts: 10,239
Likes: 0
moon light 
__________________
http://www.woundedwarriorproject.org
http://www.woundedwarriorproject.org
One of the consequences of such notions as "entitlements" is that people who have contributed nothing to society feel that society owes them something, apparently just for being nice enough to grace us with their presence.”
Thomas Sowell (American Writer and Economist, b.1930)
Thomas Sowell (American Writer and Economist, b.1930)
ZAP yo dumb ass!!!!
Joined: Aug 2001
Posts: 4,015
Likes: 0
Originally Posted by GsEclipse02
bought those lights that are bolts but they are shitty and just point out towards the people and they dont any thing to the plate ....
I bought the bolts also, except these bolts are "sliced" out on the SIDE of the bolt, therefore shooting the light sideways, onto the tag. I got them at cycle gear for an ass raping price of 26 dollars.
__________________
Matt Patton
RIP Jason Harrill 6-12-06: Died doing what he loved
Matt Patton
RIP Jason Harrill 6-12-06: Died doing what he loved
GSXR
Joined: Oct 2003
Posts: 464
Likes: 0
the led most likely shorted out immediatly b/c you didn't put a resistor in the circuit. go to radio shack and either get a 0-10K potentiometer or a 1K, 2.2K and 5K resistor and play around w/ them till u get the brightness u want. they also sell chrome led holders that you could drill into your undertray or undertail
__________________
Registered User
Joined: Apr 2004
Posts: 12,100
Likes: 0
Originally Posted by Matt the Pilot
I bought the bolts also, except these bolts are "sliced" out on the SIDE of the bolt, therefore shooting the light sideways, onto the tag. I got them at cycle gear for an ass raping price of 26 dollars.
i payed 9 bucks you hey what you payed for .... you payed more and yours are more fuctional
