New Dual Ball Bearing Turbo Installed
you thank that is funny wait till cecil tells you how bad he was running and how many times he got beat at bradenton last night. hahha sorry cecil couldn't resist. he didn't tell anyone because he didn't want to look too bad. hahaha
__________________
Originally Posted by sl2racer
you thank that is funny wait till cecil tells you how bad he was running and how many times he got beat at bradenton last night. hahha sorry cecil couldn't resist. he didn't tell anyone because he didn't want to look too bad. hahaha
Ok... here's the skinny.
Took the bike down for test & tune to actually "test & tune".
And yes, I knew it would be embarrassing so I did not look for much company this time.
First Pass: Boost spiking well beyond 20psi... not good, short shifted and coasted through... lost to another Busa.
However, I did get to hear the blow off valve

Switched waste gate hoses from front to rear (and vice versa).
Second Pass: Low Boost (5psi), raced the Busa again... got him by a good bit.
Third Pass: High Boost (10psi), raced Johnny Turbo on his 350rwhp GSXR1K... ummm, I lost... bad.
Got too excited, blew the tire, missed a shift, and watch him run away.

Forth Pass: High Boost (10psi), raced Johnny on his ZX12... ummm, I lost agin, but not nearly as bad.

The bike appears to be running well... need to put some miles on it to better gauge the mods.
So anyway... she's home.
Here's a couple pics taken a few moments ago...
.



__________________
http://www.woundedwarriorproject.org
http://www.woundedwarriorproject.org
One of the consequences of such notions as "entitlements" is that people who have contributed nothing to society feel that society owes them something, apparently just for being nice enough to grace us with their presence.”
Thomas Sowell (American Writer and Economist, b.1930)
Thomas Sowell (American Writer and Economist, b.1930)
I think I found another problem... the blue up-pipe tubing keeps sliding iff the plenum.... it's a couple of inches too short.
It is my beliefe that I have not been benefiting from the Boost as expected.
THis would explain how I was going through the 1/8 at 120mph (6.4)and only getting up to 145mph in the 1/4 (9.6/7).
I have also encountered more drama with this freakin thing
It either has a boost leak or an issue with the secondary injectors.
It's falling on it's nose around 5K RPM.
This project is so very frustrating...
It is my beliefe that I have not been benefiting from the Boost as expected.
THis would explain how I was going through the 1/8 at 120mph (6.4)and only getting up to 145mph in the 1/4 (9.6/7).
I have also encountered more drama with this freakin thing

It either has a boost leak or an issue with the secondary injectors.
It's falling on it's nose around 5K RPM.
This project is so very frustrating...
__________________
http://www.woundedwarriorproject.org
http://www.woundedwarriorproject.org
One of the consequences of such notions as "entitlements" is that people who have contributed nothing to society feel that society owes them something, apparently just for being nice enough to grace us with their presence.”
Thomas Sowell (American Writer and Economist, b.1930)
Thomas Sowell (American Writer and Economist, b.1930)
Last edited by Cecil; May 21, 2005 at 08:55 AM.
Guest
Posts: n/a
ok you guys can all hate on my post... i dont care... but the busa doesnt get my p.p. hard... and with the turbo it just makes me feel even closer to death... so no thanks... but i am sure she is one sick bitch... and dont cry cecil... i still love you... 
-Keith
-Keith
Originally Posted by Cecil
I think I found another problem... the blue up-pipe tubing keeps sliding iff the plenum.... it's a couple of inches too short.
It is my beliefe that I have not been benefiting from the Boost as expected.
THis would explain how I was going through the 1/8 at 120mph (6.4)and only getting up to 145mph in the 1/4 (9.6/7).
I have also encountered more drama with this freakin thing
It either has a boost leak or an issue with the secondary injectors.
It's falling on it's nose around 5K RPM.
This project is so very frustrating...
It is my beliefe that I have not been benefiting from the Boost as expected.
THis would explain how I was going through the 1/8 at 120mph (6.4)and only getting up to 145mph in the 1/4 (9.6/7).
I have also encountered more drama with this freakin thing

It either has a boost leak or an issue with the secondary injectors.
It's falling on it's nose around 5K RPM.
This project is so very frustrating...


